Installation guide

Alarm Relay
7
Press zone key 7.
This takes you to the Output Control menu.
3
Press zone key 3.
This takes you to the Alarm Relay submenu.
ACK
RESET
– Press the ACK key.
The alarm relay is activated.
– Press the RESET key.
The alarm relay is deactivated.
Fault Relay
7
Press zone key 7.
This takes you to the Output Control menu.
4
Press zone key 4.
This takes you to the Fault Relay submenu.
ACK
RESET
– Press the ACK key.
The fault relay is activated.
– Press the RESET key.
The fault relay is deactivated.
OC/Relay Extension
7
Press zone key 7.
This takes you to the Output Control menu.
5
Press zone key 5.
This takes you to the OC/Relay Ext submenu.
4.7.3
4.7.4
4.7.5
Conventional Fire Panel System Configuration | en 55
Bosch Sicherheitssysteme GmbH 2014.06 | 7.0 | F.01U.172.980