Operation Manual

6 720 645 350 (2010/09)
16 | Operation with flap open
5.3 Constant room temperature
However, if you want to specify a constant room
temperature for a longer period, you can select
so-called constant operation using the operating
mode selector.
The following constant room temperature
settings are possible:
• : Comfort in constant operation
The controller regulates constantly to the
room temperature (high) set for Comfort
mode. Factory setting: 21 °C
• : Economy in constant operation
The controller regulates constantly to the
room temperature (average) set for Economy
mode. Factory setting: 15 °C
• : Frost protection in constant operation
The controller regulates constantly to the
room temperature (low) set for Frost mode.
Factory setting: 5 °C. The system is protected
against frost if heating is switched on at the
heating appliance. Observe the further
information in the heating appliance operating
instructions.
B Open flap.
B Turn the operating mode selector to the
required positions.
If at all possible, leave the
operating mode selector set to
auto. Only that way can you enjoy
the full comfort of the heating
program.
NOTICE: Check the suitability of a
low room temperature for plants
and pets.
You can change the set
temperature with the rotary
selector (Æ Chapter 4.2). Turning
the operating mode selector
cancels the modified temperature
again.