Operation Manual

6 720 645 350 (2010/09)
24 | Operation with flap open
Adapting the DHW circulation pump program
B Open flap.
B Press the menu key.
The MAIN MENU is displayed; menu point
Holiday is highlighted.
B Turn the rotary selector to highlight the menu
point Domestic hot water. Push the rotary
selector.
Menu DHW is displayed; menu point DHW
and DHW circulation pump is highlighted.
B Turn the rotary selector to highlight menu
point DHW circ pump prog .
B Push the rotary selector.
Menu DHW CIRC PUMP PROGRAMME is
displayed; menu point Edit is highlighted.
B Push the rotary selector.
Menu EDIT DHW C. PUMP PROGRAMME is
displayed.
5.5.4 Resetting a DHW program to the factory
settings
If you wish to return the DHW program to its
original settings, you can reset the DHW program
to its factory settings.
B Carry out the steps up to menu point Edit
(Æ Chapter 5.5.3).
This menu is only displayed if a DHW
circulation pump is available.
If, at this point, As heating
programme is displayed, change the
setting to Separate programmes
(Æ Chapter 5.5.2). Only then will
the next steps become available.
Generally, the additional steps
correspond to the setting of
program points P1 ...P6 of a heating
program (Æ Chapter 5.4.2). In
addition to the switching times, the
DHW circulation pump can be
switched on or off.
Generally, the additional steps for
resetting the DHW program
correspond to those for resetting a
heating program (Æ Chapter 5.4.3).