Operation Manual

6 720 645 350 (2010/09)
26 | Operation with flap open
5.6.2 Setting the end of the holiday
B Turn the rotary selector to highlight menu
point End.
B Push the rotary selector.
The input field for the year flashes.
B Turn the rotary selector to set the year.
B Push the rotary selector to confirm the
setting.
The input field for the month flashes.
B Set the month and day in the same way as the
year.
After confirming the day, menu point End is
highlighted again.
5.6.3 Starting the holiday program
B Press the menu key to exit the menu.
The holiday program starts on the selected
date.
• Whilst the holiday program is active, the
display shows and the selected end of the
holiday, e.g. HOLIDAY UNTIL 30.09.2010.
• After expiry of the holiday program, the
controller operates again with the selected
heating and DHW programs.
5.6.4 Terminating the holiday program early
B Open flap.
B Press the menu key.
The main menu is displayed; menu point
Holiday is highlighted.
B Push the rotary selector.
The holiday menu is displayed; menu point
Start is highlighted.
B Push the rotary selector.
The input field for the year flashes.
B Press to delete the date for the start of the
holiday.
The display shows --.--.----.
B Push the rotary selector to confirm the
setting.
This also deletes the date for the end of the
holiday.
B Press the menu key to exit the menu.
The holiday program is terminated.
The holiday program ends at 23:59
h on the selected day.