Operation Manual

6 720 645 349 (2010/09)

Operation | 25

Operation Display

Resetting all settings (for contractors only):

This function returns all adjustments of the MAIN MENUand the INSTALLER SETTINGSto their factory

settings. Following such a reset, your contractor will need to recommission the system.

If the standard display is set:

Hold down and simultaneously, until the following

warning is displayed together with a 10 second countdown:

If all previous adjustments are really to be reset:

Continue to hold down and simultaneously, until the

following prompt appears:

Press to finalise the reset.

All adjustments have now been returned to their factory settings, and the system must be re-

commissioned by a contractor.

6 720 617 763-15.2O

6 720 617 763-16.1O