Operation Manual

6 720 645 349 (2010/09)
26 | Adjusting the MAIN MENU
6 Adjusting the MAIN MENU
Detailed instructions on navigating through the
menu structure, programming, deleting settings
and resetting to the factory settings are provided
in chapter 5.2 starting on page 21.
6.1 Overview and adjustment of the MAIN MENU
The tables set out below provide:
• An overview of the menu structure (column 1).
The menu depth is identified by various
shades of grey.
For example, in menu Heating > Programme
submenus Edit and View are on the same
level.
• An overview of the factory settings (column 2),
e.g. for the purposes of resetting individual
menu point to their factory settings.
• An overview of the setting ranges of the
individual menu points (column 3).
• Space for making a note of your personal
settings (column 4).
• A way to locate detailed descriptions regarding
the individual menu points (column 5).
6.1.1 MAIN MENU: Holiday
The menu points are only shown if
the system components are present
and/or active, and if no remote
control is accessing them. Some
menu points are not shown because
they are switched off by a setting for
another menu point.
B Always set or skip menu points in
order. In that way, subsequent
menu points will be
automatically adjusted or not
shown.
Menu structure Holiday Factory setting Setting range
Personal
setting
Description
frompage
Start – – . – – . – – – – Today ... 31.12.2099
(in year/month/day steps)
31
End – – . – – . – – – – Start date ... 31.12.2099
(in year/month/day steps)
Heating Frost Frost | Economy | Comfort | Auto
Domestic hot water Off
1)
Off | Auto | On
1)
15 °C
2)
15 °C ... 60 °C | Auto
2)
DHW circulation pump Off Off | Auto | On
Thermal disinfection Off Off | On
1) DHW heating with combi boiler
2) DHW heating via DHW cylinder