Operation Manual

6 720 645 349 (2010/09)
Adjusting the MAIN MENU | 33
B Return the heating program to its factory
settings Æ page 24.
B Change the title of the heating program with
and . The 18 characters displayed
can be individually replaced by selecting the
letters and numbers offered.
Menu: Heating > Programme > View
B Show switching points and associated heating
program operating modes for All days,
Mon - Fri, Sat + Sun or the individual day of
the week as a segment ring.
6.3.2 Temperature for the operating modes
and heat-up rate
Menu: Heating > Parameter
Use this menu to permanently set the
temperature levels for the 3 operating modes
(Comfort / Economy / Frost ) and the
heat-up rate to suit your personal preferences
and your home.
Menu: Heating > Parameter > Heating levels
B Setting the required room temperature for the
operating modes:
– Comfort = maximum temperature
required (e.g. when the living space is
occupied and occupants require a
comfortable room temperature).
– Economy = average temperature
required (e.g. if a low room temperature is
adequate or if everyone is away or asleep
and the house should not cool down
excessively).
– Frost = minimum temperature required
(e.g. when the home is unoccupied or
everyone is asleep and it is OK for the
house to cool down). Consider any pets
and plants.
Menu: Heating > Parameter > Heating up speed
B Set required heat-up rate:
– Economy = The building is heated up
slowly, thus saving energy.
– Normal = The building is heated up at the
“normal” rate.
– Fast = The building is heated up quickly,
thus providing maximum comfort.
If, for example, the programming for
Thursday differs from the other
days of the week, the options All
days and Mon - Fri show
----- from --:-- for all values. That is,
there are no common switching
times and operating modes for this
selection.
To enter spaces:
B If the selected character is shown
with a dark background, delete by
pressing (space = _ )