Operation Manual

6 720 645 349 (2010/09)
40 | Viewing information
7 Viewing information
Menu: INFO
This menu allows you to view various items of
system information.
Detailed instructions on navigating through the
menu structure are provided in chapter 5.2
starting on page 21.
INFO menu overview
The table below provides:
• An overview of the menu structure (column 1).
The menu depth is identified by various
shades of grey.
For example, menu Instruction manual and
Boiler are on the same level.
• An overview of the various display options
(column 2).
• Descriptions of the individual information
items (column 3).
The menu points are only shown if
the system components are present
and/or active, and if no remote
control is accessing them. Some
menu points are not shown because
they are switched off by a setting for
another menu point.
Menu structure INFO
Variable display
(examples)
Description
Instruction manual – –
To set new temp: turn
selector knob ...
– Various items of operating information
Boiler – –
Outside temperature 10.0 °C Current outside temperature.
Heating mode possible Yes | No Shows whether heating appliance is ready for
operation.
Current CH flow
temperature
55.0 °C Current heating appliance flow temperature.
Burner On | Off Burner status.
Heating pump On | Off Status of pump in heating appliance.
Maximum CH flow
temperature
75.0 °C Maximum flow temperature set on heating appliance.
Maximum domestic hot
water temperature
60.0 °C Maximum DHW temperature set on heating
appliance.
Service required Yes | No Shows whether a heating appliance service/
inspection is due.