Operating instructions

22 | English
1 619 929 777 | (23.7.07) Bosch Power Tools
Technical Data
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 91 dB(A); Sound
power level 102 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Hammer drilling into concrete: Vibration emis-
sion value a
h
=20 m/s
2
, Uncertainty K=1.5 m/s
2
,
Chiselling: Vibration emission value a
h
=13 m/s
2
,
Uncertainty K=1.5 m/s
2
.
The vibration emission level
given in this information sheet
has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used
to compare one tool with another.
The vibration emission level will vary because of
the ways in which a power tool can be used and
may increase above the level given in this infor-
mation sheet. This could lead to a significant un-
derestimate of exposure when the tool is used
regularly in such a way.
Note: To be accurate, an estimation of the level
of exposure to vibration experienced during a
given period of work should also take into ac-
count the times when the tool is switched off
and when it is running but not actually doing the
job. This may significantly reduce the exposure
level over the total working period.
Rotary Hammer GBH 36 V-LI
Professional
GBH 36 VF-LI
Professional
Article number
3 611 J00 R.. 3 611 J01 R..
Speed control
z z
Stop rotation
z z
Right/left rotation
z z
Quick change chuck
– z
Rated voltage
V= 36 36
Rated power input
W600600
Output power
W430430
Impact frequency at rated speed
bpm 0–4260 0–4260
Impact energy per stroke
J0–3.0 0–3.0
Rated speed
– Right rotation
– Left rotation
rpm
rpm
0–960
0
–930
0–960
0
–930
Tool holder
SDS-plus SDS-plus
Spindle collar diameter
mm 50 50
Drilling diameter, max.:
– Concrete
– Brickwork (with core bit)
– Steel
– Wood
mm
mm
mm
mm
26
68
13
30
26
68
13
30
Weight according to EPTA-Procedure 01/2003
kg 4.3 4.5
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
WARNING
OBJ_BUCH-283-001.book Page 22 Monday, July 23, 2007 12:41 PM