OBJ_DOKU-8464-001.fm Page 1 Thursday, September 13, 2007 10:30 AM Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen www.bosch-pt.com GBM 32-4 Professional 1 609 929 M58 (2007.
OBJ_BUCH-506-001.book Page 3 Thursday, September 13, 2007 10:31 AM 3| 3 600 320 014 (MK3–MK2) 1 603 115 004 (MK2–5/8") 1 608 571 056 2 608 030 056 (MS 80 G) 2 608 030 057 (MS 100 G) 1 609 929 M58 | (13.9.
OBJ_BUCH-506-001.book Page 4 Thursday, September 13, 2007 10:31 AM 4| 5 3 4 2 1 6 3 7 GBM 32-4 Professional 1 609 929 M58 | (13.9.
OBJ_BUCH-506-001.book Page 5 Thursday, September 13, 2007 10:31 AM 5| A 8 2 9 9 10 11 1 609 929 M58 | (13.9.
OBJ_BUCH-506-001.book Page 13 Thursday, September 13, 2007 10:31 AM English | 13 General Power Tool Safety Warnings en WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
OBJ_BUCH-506-001.book Page 14 Thursday, September 13, 2007 10:31 AM 14 | English g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 5) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
OBJ_BUCH-506-001.book Page 15 Thursday, September 13, 2007 10:31 AM English | 15 f Take protective measures when dust can develop during working that is harmful to one’s health, combustible or explosive. Example: Some dusts are regarded as carcinogenic. Wear a dust mask and work with dust/chip extraction when connectable. f Keep your workplace clean. Blends of materials are particularly dangerous. Dust from light alloys can burn or explode.
OBJ_BUCH-506-001.book Page 16 Thursday, September 13, 2007 10:31 AM 16 | English Noise/Vibration Information Measured values determined according to EN 60745. Typically the A-weighted noise levels of the product are: Sound pressure level 86 dB(A); Sound power level 97 dB(A). Uncertainty K =3 dB. Wear hearing protection! Vibration total values (triax vector sum) determined according to EN 60745: Drilling into metal: Vibration emission value ah =3.1 m/s2, Uncertainty K <1.5 m/s2.
OBJ_BUCH-506-001.book Page 17 Thursday, September 13, 2007 10:31 AM English | 17 Operation Switching On and Off Starting Operation f Observe correct mains voltage! The voltage of the power source must agree with the voltage specified on the nameplate of the machine. Power tools marked with 230 V can also be operated with 220 V. Gear Selection, Mechanical f Actuate the gear selector 3 only when the machine is at a standstill. Four speed ranges can be preselected with the gear selector 3.
OBJ_BUCH-506-001.book Page 18 Thursday, September 13, 2007 10:31 AM 18 | English WARNING! Important instructions for connecting a new 3-pin plug to the 2-wire cable. The wires in the cable are coloured according to the following code: Do not connect the blue or brown wire to the earth terminal of the plug. Important: If for any reason the moulded plug is removed from the cable of this power tool, it must be disposed of safely.