Instruction Manual

12 | English
Random orbit sanders GET 75-150 GET 55-125
Rated power input W 750 550
No-load speed n
0
rpm 3300–7300 3300–7800
No-load orbital stroke rate rpm 6600–14,600 6600–15,600
Sanding pad speed during coarse sanding rpm 290–640 200–480
Orbit diameter mm 4.5 3.5
Sanding pad diameter mm 150 125
Weight according to EPTA-Procedure
01:2014
kg 2.6 2.4
Protection class
/ II / II
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
GET 75-150 GET 55-125
3 601 B57 1xx 3 601 B57 0xx
Noise emission values determined according to EN62841-2-4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection
dB(A)
dB(A)
dB
85
96
3
86
97
3
Total vibration values a
h
(triax vector sum) and uncertainty K determined according to EN62841-2-4:
Grinding: Normal mode
a
h
K
m/s
2
m/s
2
5.5
1.5
5.5
1.5
Grinding: Turbo mode
a
h
K
m/s
2
m/s
2
6.5
1.5
6.0
1.5
Polishing
a
h
K
m/s
2
m/s
2
7.0
1.5
7.5
1.5
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u Pull the plug out of the socket before carrying out any
work on the power tool.
Changing the Sanding Sheet
To remove the sanding sheet (8), lift it from the side and pull
it from the sanding pad (11).
Remove dirt and dust from the sanding pad (11), e.g. with a
paintbrush, before attaching a new sanding sheet.
1 609 92A 4CY | (18.02.2019) Bosch Power Tools