Specifications

English | 15
Bosch Power Tools 2 609 932 821 | (26.10.11)
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 04.10.2011
Assembly
f Before any work on the machine itself, pull the mains plug.
Selecting the Sanding Sheet
Depending on the material to be worked and the required rate of material removal, different sanding sheets are available:
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
Material Application Grain size
–Paint
– Varnish
– Filling compound
– Filler
For sanding off paint
coarse 40
60
For sanding primer (e. g., for removing brush dashes, drops
of paint and paint run)
medium 80
100
120
For final sanding of primers before coating
fine 180
240
320
400
Expert for Wood
– All wooden materials
(e.g., hardwood, soft-
wood, chipboard, build-
ing board)
Best for Wood
– Hardwood
– Particle Board
– Building board
– Metal materials
For coarse-sanding, e. g. of rough, unplaned beams and
boards
coarse 40
60
For face sanding and planing small irregularities
medium 80
100
120
For finish and fine sanding of wood
fine 180
240
320
400
– Automotive paint
– Masonry, stone
–Marble
–Granite
–Ceramic
–Glass
– Plexiglas
– Glass-fibre plastics
For pre-sanding
coarse 80
For shaping and braking edges
medium 100
120
For final sanding and forming
fine 180
240
320
400
For polish-sanding and rounding off edges
very fine 600
1200
OBJ_BUCH-1330-003.book Page 15 Wednesday, October 26, 2011 11:52 AM