OBJ_DOKU-7469-001.fm Page 1 Monday, September 17, 2007 10:32 AM Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen www.bosch-pt.com GHO 26-82 Professional 1 609 929 M03 (2007.
OBJ_BUCH-446-001.book Page 3 Monday, September 17, 2007 10:34 AM 3| 4 5 3 2 1 9 8 3 7 6 10 GHO 26-82 Professional 1 609 929 M03 | (17.9.
OBJ_BUCH-446-001.book Page 4 Monday, September 17, 2007 10:34 AM 4| A B 9 15 15 14 9 11 12 13 C D 17 ø 35 mm 16 18 3 E 24 19 25 21 20 19 20 23 21 22 1 609 929 M03 | (17.9.
OBJ_BUCH-446-001.book Page 5 Monday, September 17, 2007 10:34 AM 5| F G 9 9 mm max 26 82 ma mm x H I 10 45° 7 27 6 K 29 27 28 1 609 929 M03 | (17.9.
OBJ_BUCH-446-001.book Page 14 Monday, September 17, 2007 10:34 AM 14 | English General Power Tool Safety Warnings en WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
OBJ_BUCH-446-001.book Page 15 Monday, September 17, 2007 10:34 AM English | 15 g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 5) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
OBJ_BUCH-446-001.book Page 16 Monday, September 17, 2007 10:34 AM 16 | English Functional Description Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. While reading the operating instructions, unfold the graphics page for the machine and leave it open. Intended Use The machine is intended for planing of firmly supported wooden materials, such as beams and boards.
OBJ_BUCH-446-001.book Page 17 Monday, September 17, 2007 10:34 AM English | 17 The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the tool.
OBJ_BUCH-446-001.book Page 18 Monday, September 17, 2007 10:34 AM 18 | English f Do not reach into the saw dust ejector with your hands. They could be injured by rotating parts. To ensure optimum extraction of dust/chips, always work with external dust extraction or a chip/dust bag. External Dust Extraction (see figure C) An extraction hose (Ø 35 mm) 16 (accessory), can be attached on either side of the chip ejector. Connect the vacuum hose 16 to a vacuum cleaner (accessory).
OBJ_BUCH-446-001.book Page 19 Monday, September 17, 2007 10:34 AM English | 19 Only sharp blades achieve good cutting capacity and give the machine longer life. The integrated park rest 26 also allows for continued planing at any given location on the workpiece after an interruption: – With the park rest folded down, place the machine on the location of the workpiece where the planing is to be continued. – Switch on the machine.
OBJ_BUCH-446-001.book Page 104 Monday, September 17, 2007 10:34 AM 104 | 1 608 132 006 1x: 2 608 635 376 2x: 2 608 635 350 2 607 000 102 2 605 411 035 2 607 001 077 (45°) Ø 35 mm 3 m 2 609 390 392 5 m 2 609 390 393 1 609 929 M03 | (17.9.