Operation Manual

English | 5
Bosch Power Tools F 016 L70 892 | (14.10.13)
Technical Data
Mounting and Operation
Starting
For Your Safety
Warning! Switch off, remove plug from mains be-
fore adjusting, cleaning or if cable is cut, dam-
aged or entangled.
Your pressure washer requires an earth connection. The op-
erating voltage is 220-240 V AC/50 Hz or 220-230 V AC/
60 Hz according the product number indicated on the type
plate. Do not connect a 60 Hz designed product to a 50 Hz
supply and vice versa. Only use approved extension cables.
Contact your Bosch Service Centre for details
If you want to use an extension cable when operating your
high pressure washer, only the following cable dimensions
should be used:
– 2.5 mm
2
– max length 20 m
– 4.0 mm
2
– max length 50 m
Note: If an extension cable is used it must be earthed and con-
nected through the plug to the earth cable of your supply net-
work in accordance with prescribed safety regulations.
If in doubt contact a qualified electrician or the nearest Bosch
Service Centre.
WARNING! Inadequate extension cables can be
dangerous. Extension cable, plug and socket
must be of watertight construction and intended
for outdoor use.
Cable connections should be kept dry and off the ground.
Pressure washer GHP 5-14 GHP 6-14
Article number
3 600 J10 1.. 3 600 J10 2..
Rated power
kW 2.4 2.6
Supply Temperature max.
°C 50 50
Supply rate min.
l/min 8.3 10.5
Rated pressure
MPa 14 14
Max. operating pressure
MPa 15 15
Flow rate
l/min 8.3 10.5
Maximum inlet pressure
MPa 1 1
Kickback force at the gun to the maximum pressure
N22.9832.24
Motor Insulation
Class F Class F
Motor Protection
IPX5 IPX5
Detergent tank
l 
Autostop function
 
Net impedance
Ω Ω
Sound pressure level
Uncertainty
dB(A)
dB(A)
84.5
3
82.5
3
Sound power level
Uncertainty
dB(A)
dB(A)
92
3
90
3
Vibration total value
Uncertainty
m/s
2
m/s
2
4.91
1.5
4.91
1.5
Weight according to EPTA-Procedure 01/2003
kg 23.4 25.6
Protection class
/I /I
Serial number
See serial number (rating plate) on pressure washer.
Action Figure
Delivery Scope 1
Handle Assembly 2
Filling up detergent tank 3
Water connection 4
Cleaning the Filter 5
Connecting high pressure water supply hose/
nozzle 6
Adjust water pressure 7
Adjust water jet 8
Switching On and Off 9
Clean nozzle 10
220 V – 240 V/50 Hz 220 V – 230 V/60 Hz
3 600 J10 0F0
3 600 J10 0L0
3 600 J10 0K0
3 600 J10 000
3 600 J10 070
3 600 J10 1B0
3 600 J10 1P0
3 600 J10 2B0
OBJ_BUCH-1643-003.book Page 5 Monday, October 14, 2013 1:33 PM