Use and Care Guide

-20-
If the measuring tool is outside of the self-leveling range, the laser
lines will flash quickly.
If during work with automatic leveling you switch to the “working with-
out automatic leveling” mode (On/Off switch 2 in position “
”), the
first combination of this mode’s lines is always activated.
Working with Automatic Leveling
Sequence of
actions
Horizontal line
operation
Vertical line
operation
Indicator 3 for
battery capacity
Indicator 4 for
working without
automatic
leveling
Figure
On/Off switch 2 in position
“
”
● ●
Cross-line
operation
green B2
Press button for horizontal
line operating mode 6 once
● —
green
C2,
H
Press button for vertical line
operating mode 5 once
— ●
green I, D2
Press button for vertical line
operating mode 5 once and
horizontal line operating
mode 6 once
●●
green
F1,
F2
Working without Automatic Leveling
The laser lines flash slowly in the “working without automatic leveling”
mode.
If during work without automatic leveling you switch to the “working
with automatic leveling” mode (On/Off switch 2 in position “
”),
the first combination of this mode’s indicators is always activated.