Operation Manual

8 | English
1 609 92A 0LH | (28.4.14) Bosch Power Tools
Laser beam diameter (at
25 °C/77 °F), approx.
– at 10 m (33 ft) distance
– at 30 m (98 ft) distance
9 mm (0.35'')
C)
27 mm (1.1'')
C)
9 mm (0.35'')
C)
27 mm (1.1'')
C)
Automatic switch-off after approx.
–Laser
– Measuring tool (without meas-
urement)
20 s
5min
20 s
5min
Weight according to
EPTA-Procedure 01/2003
0.1 kg (3.5 oz) 0.1 kg (3.5 oz)
Dimensions
105 x 41 x 24 mm
(4.1'' x 1.6'' x 0.9'')
105x41x24mm
(4.1'' x 1.6'' x 0.9'')
Degree of protection
IP 54 (dust and splash
proof)
D)
IP 54 (dust and splash
proof)
D)
Batteries
Rechargeable batteries
2 x 1.5 V LR03 (AAA)
2x1.2VHR03(AAA)
2x1.5VLR03(AAA)
2 x 1.2 V HR03 (AAA)
Individual measurement per
battery set 5000 5000
Setting the unit of measure
– 
Setting the sound
 –
A) For measurements from the rear measuring tool edge, applies to high reflectivity of the target
(e.g. a white-painted wall), weak backlighting and +25 °C (+ 77 °F) operating temperature. In addi-
tion, a deviation influence of ±0.05 mm/m ( ±0.002 in/3.28 ft) must be taken into account.
B) For measurements from the rear measuring tool edge, applies to low reflectivity of the target (e.g.
a black carton), strong backlighting and
– 10 °C to +45 °C (+14 °F ... +113 °F) operating temper-
ature. In addition, a deviation influence of ±0.15 mm/m ( ±0.006 in/3.28 ft) must be taken into ac-
count.
C) at +25 °C (+77 °F) operating temperature
D) except battery compartment
The measuring tool can be clearly identified with the serial number 5 on the type plate.
Digital Laser Measure GLM 30
OBJ_BUCH-2099-003.book Page 8 Monday, April 28, 2014 1:27 PM