Product specifications

English | 29
Bosch Power Tools 1 609 929 U13 | (9.12.09)
Maintenance Schedule
Always keep air outlet 4, discharge lock-off 2 and trigger
10 clean and free of foreign material (dust, chips, sand,
etc).
Clean the magazine 8. Remove any plastic or wood chips
that may accumulate in the magazine during operation.
Clean the pneumatic tool in regular intervals using com-
pressed air.
Measure Explanation Action
Draining the exhaust filter daily.
Prevents the accumulation of dirt/
debris and moisture in the pneumatic
tool.
– Open the drain valve.
Keeping the lubricator filled at all
times.
Ensures the lubrication of the pneu-
matic tool.
– Fill lubricator with the recommend-
ed lubricants.
(See “Lubricating the Pneumatic
Tool”, page 28)
Cleaning the magazine 8 and maga-
zine slider 11.
Prevents a staple (GTK 40) or brad
(GSK 50) from becoming jammed.
– Blow out the mechanism of the
magazine/magazine slider daily with
compressed air.
Ensuring that the discharge lock-off 2
functions properly.
Promotes your work safety and effi-
cient usage of the pneumatic tool.
– Blow out the mechanism of the
discharge lock-off daily with com-
pressed air.
Lubricating the pneumatic tool.
Reduces the wear of the pneumatic
tool.
–Apply 2–3 drops of lubricant into air
connector 6.
(See “Lubricating the Pneumatic
Tool”, page 28)
Draining the compressor. Prevents the accumulation of dirt/
debris and moisture in the pneumatic
tool.
– Open the drain valve of the com-
pressor tank.
OBJ_BUCH-1038-001.book Page 29 Wednesday, December 9, 2009 1:38 PM