Operation Manual
en
27
Controls
Fig. 2
Switching
the appliance on
Switch on the appliance with the
On/Off button 7.
A warning signal sounds. “AL” flashes on
the temperature display 1, the super
freezing display 3 flashes and the alarm
display 2 is lit.
Press the alarm button 6. The warning
signal switches off and the super
freezing display 3 goes out.
When the appliance has reached the set
temperature, the temperature display 1
indicates the set temperature. Alarm
display 2 goes out.
When the door is open, the light is lit.
Operating tips
■ When the appliance has been
switched on, it may take several hours
until the set temperature has been
reached.
■ The fully automatic No Frost system
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
■ The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
■ The appliance features door
ventilation to prevent a partial vacuum
in the freezer compartment and to
ensure that the appliance door can be
opened easily at any time.
1 Temperature display
Indicates the set temperature of
the freezer compartment.
2 Alarm display
Lights up if the freezer
compartment becomes too warm.
It goes out when the freezer
compartment has reached the set
temperature.
3 Display super freezing
Illuminates when super freezing is
on.
4 Temperature selection button
The required temperature is set
with this button.
5 “super” button
To switch on super freezing
function.
See chapter entitled “Super
freezing”.
6 Alarm button
Used to switch off the warning
signal, see chapter “Alarm
function”.
7 On/Off button
Serves to switch the whole
appliance on and off.