Operating instructions

English | 11
Bosch Power Tools 2 609 932 830 | (12.12.11)
f Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol Meaning
GST 140 CE: Jigsaw with constant
electronic control
Grey-marked area: Handle
(insulated gripping surface)
GST 140 BCE: Jigsaw with constant
electronic and bow handle
Grey-marked area: Handle
(insulated gripping surface)
Read all safety warnings and all
instructions
Before any work on the machine
itself, pull the mains plug from the
socket outlet
Wear protective gloves
Additional information
Movement direction
Reaction direction
Next step of action
Sawdust blower device
Extraction
Mitre/Bevel Angle
Low stroke rate/speed
High stroke rate/speed
Switching On
Switching Off
On/Off switch lock-on
Worklight
Prohibited action
Correct result
Saw with moderate pressure in
order to achieve optimal and precise
cutting results.
When sawing metal, apply coolant/
ubricant alongside the cutting line
Article number (10-digit)
P
1
Rated power input
n
0
Stroke rate at no-load
Cutting depth, max.
Wood
Aluminium
Metal
Particle board
Weight according to
EPTA-Procedure 01/2003
Symbol Meaning
OBJ_BUCH-1320-003.book Page 11 Monday, December 12, 2011 10:15 AM