Product Info

Cleaning and servicing en
17
5. Remove all fittings and accessor-
ies from the appliance.
→Page17
12.2 Cleaning the appliance
WARNING
Risk of electric shock!
An ingress of moisture can cause an
electric shock.
▶ Do not use steam- or high-pres-
sure cleaners to clean the appli-
ance.
Liquid in the lighting or in the con-
trols can be dangerous.
▶ The rinsing water must not drip
into the lighting or controls.
ATTENTION!
Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
▶ Do not use hard scouring pads or
cleaning sponges.
▶ Do not use harsh or abrasive de-
tergents.
▶ Do not use cleaning products with
a high alcohol content.
If you clean fittings and accessories
in the dishwasher, this may cause
them to become deformed or discol-
our.
▶ Never clean fittings and accessory
in the dishwasher.
1. Prepare the appliance for cleaning.
→Page16
2. Clean the appliance, the fittings,
the accessories and the door seals
with a dish cloth, lukewarm water
and a little pH-neutral washing-up
liquid.
3. Dry thoroughly with a soft, dry
cloth.
4. Insert the fittings.
5. Electrically connect the appliance.
→Page10
6. Switch on the appliance.
→Page13
7. Putting the food into the appliance.
12.3 Cleaning the ventilation
grille
1. Remove the exterior ventilation
grille for cleaning.
‒ To do this, depress the clips in
the ventilation openings and
simultaneously remove the ex-
terior ventilation grille forwards.
2. Clean the exterior ventilation grille
with lukewarm soapy water and a
dish cloth.
3. Let the exterior ventilation grille dry
completely and insert it.
12.4 Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the frozen food
container
1. Take out the frozen food container
as far as it will go.