Operation Manual

16 | English
1 609 92A 0EE | (13.8.13) Bosch Power Tools
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Mounting and Operation
The following table indicates the action objectives for mounting and operation of the power tool. The instructions for each action
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
Action Figure Please observe Page
Grinding, preparation 1 243 – 244
Cutting, preparation 2 245 – 246
Cutting stone, brick and tiles,
preparation (recommendation)
3 247 – 248
Removing paint, preparation 4 249
Removing rust, preparation 5 250
Drilling tiles, preparation 6 251
Mounting the quick-clamping nut 7 251 – 252
Dismounting the quick-clamping
nut
8252
30°
OBJ_BUCH-1188-003.book Page 16 Tuesday, August 13, 2013 2:49 PM