Instruction manual
Table Of Contents
- [en] Instruction manual 2
- Ú Table of contents
- Your new oven 4
- Before using the oven for the first time 6
- Setting the oven 7
- Setting the time-setting options 7
- Childproof lock 9
- Changing the basic settings 9
- Care and cleaning 9
- Cleaning system 12
- Troubleshooting 12
- After-sales service 13
- Energy and environment tips 13
- Tested for you in our cooking studio. 14
- Convenience products 18
- Acrylamide in foodstuffs 20
- Test dishes 20
- Safety notes
- Causes of damage
- Your new oven
- Before using the oven for the first time
- Setting the oven
- Setting the time-setting options
- Timer
- Cooking time
- 1. Use the function selector to set the type of heating.
- 2. Set the temperature or grill setting using the temperature selector.
- 3. Press the 0 button twice.
- 00:00 is shown in the display. The time symbols light up and the brackets are around r.
- Default value for @ button = 30 minutes
- Default value for A button = 10 minutes
- The cooking time has elapsed
- Changing the cooking time
- Cancelling the cooking time
- Checking the time settings
- 1. Use the function selector to set the type of heating.
- End time
- 1. Adjust the function selector.
- 2. Set the temperature selector.
- 3. Press the 0 button twice.
- 4. Use the @ or A button to set the cooking time.
- 5. Press the 0 button.
- The brackets are around p. The time when the dish will be ready is displayed.
- The cooking time has elapsed
- Changing the end time
- Cancelling the end time
- Checking the time settings
- 1. Adjust the function selector.
- Clock
- Childproof lock
- Changing the basic settings
- Care and cleaning
- Notes
- Cleaning agents
- Cleaning the hook-in racks
- m Risk of burning due to hot components in the cooking compartment!
- 1. Push the hook-in rack upwards at the front and unhook to the side.
- 2. Pull the hook-in rack forwards at the rear and unhook to the side.
- 3. Clean the hook-in rack with washing-up liquid and a sponge or brush.
- 4. Align the hook-in rack with the indentation (a) facing upwards, so that the shelf heights match.
- 5. Insert the hook-in rack at the rear to the limit stop and push to the rear.
- 6. Insert the hook-in rack at the front to the limit stop and push downwards.
- 7. Push telescopic shelves in as far as the limit stop and close appliance door.
- Removing and fitting the appliance door
- m Risk of injury!
- m Risk of injury!
- Removing the appliance door
- 1. Open the appliance door fully.
- 2. Open the locking levers on the left and right-hand side fully.
- 3. Close the appliance door until resistance becomes noticeable (figure A)
- 4. With both hands, grip the door on the left and right-hand side, close the door a little more and pull it out (figure B).
- Fitting the appliance door
- 1. Insert the hinges in the left and right-hand holders (figure C).
- Cleaning the door panels
- m Risk of injury!
- m Risk of injury!
- Removing the door panel
- Note
- 1. Unhook the appliance door and lay it on a soft, clean surface with the front side facing downwards (see section: Removing and installing the appliance door).
- 1. Press the retainer on the intermediate panel on one side and unlatch it, using a spatula for instance (figure C).
- 1. Place the intermediate panel in the supports on the left and right (figure D).
- 1. Slide in the door panel all the way.
- Cleaning system
- Troubleshooting
- After-sales service
- Energy and environment tips
- Tested for you in our cooking studio
- Convenience products
- Acrylamide in foodstuffs
- Test dishes
7
Setting the oven
There are various ways in which you can set your oven. Here
we will explain how you can select the desired type of heating
and temperature or grill setting. You can select the oven
cooking time and end time for your dish. Please refer to the
section on Setting the time-setting options.
Type of heating and temperature
Example in the picture: Top/bottom heating at 190 °C.
1.Use the function selector to set the type of heating.
2.Set the temperature or grill setting using the temperature
selector.
The oven begins to heat up.
Switching off the oven
Turn the function selector to the off position.
Changing the settings
The type of heating and temperature or grill setting can be
changed at any time using their respective selectors.
Rapid heating
With rapid heating, your oven reaches the temperature selected
particularly quickly.
Use rapid heating when temperatures above 100 °C are
selected. The following types of heating are suitable:
■ < 3D hot air
■ % Top/bottom heating
■ 6 Pizza setting
To ensure an even cooking result, do not place your dish in the
cooking compartment until rapid heating is complete.
1.Set the type of heating and temperature.
2.Press the c button.
The
c symbol lights up in the display. The oven begins to
heat up.
The rapid heating process is complete
A signal sounds. The
c symbol in the display goes out. Put
your dish in the oven.
Cancelling rapid heating
Press the
c button. The c symbol in the display goes out.
Setting the time-setting options
Your oven has various time-setting options. You can use the 0
button to call up the menu and switch between the individual
functions. All the time symbols are lit when you can make
settings. The brackets [ ] show you which time-setting option
you have currently selected. A time-setting option which has
already been set can be changed directly with the
@ or A
button when the relevant time symbol is in brackets.
Timer
You can use the timer as a kitchen timer. It runs independently
of the cooking compartment. The timer has its own signal. In
this way, you can tell whether it is the timer or a cooking time
which has elapsed.
1.Press the 0 button once.
The time symbols light up in the display and the brackets are
around
U.
2.Use the @ or A button to set the timer duration.
Default value for
@button = 10 minutes
Default value for
Abutton = 5 minutes
After a few seconds, the time setting is adopted. The timer
starts. The [
U] symbol lights up in the display and the timer
duration counts down. The other time symbols go out.
The timer duration has elapsed
A signal sounds. 00:00 is shown in the display. Use the
0
button to switch off the timer.
Changing the timer duration
Use the
@ or A button to change the timer duration. After a few
seconds, the change is adopted.
Cancelling the timer duration
Use the
A button to reset the timer duration to 00:00. The
change will be adopted after a few seconds. The timer is
switched off.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the
U timer, r cooking time, p end time or 0
clock, press the
0 button repeatedly until the brackets are
around the relevant symbol. The display shows the value for a
few seconds.