Instruction manual
Table Of Contents
- [en] Instruction manual 2
- Ú Table of contents
- Your new oven 4
- Before using the oven for the first time 6
- Setting the oven 7
- Setting the time-setting options 7
- Childproof lock 9
- Changing the basic settings 9
- Care and cleaning 9
- Cleaning system 12
- Troubleshooting 12
- After-sales service 13
- Energy and environment tips 13
- Tested for you in our cooking studio. 14
- Convenience products 18
- Acrylamide in foodstuffs 20
- Test dishes 20
- Safety notes
- Causes of damage
- Your new oven
- Before using the oven for the first time
- Setting the oven
- Setting the time-setting options
- Timer
- Cooking time
- 1. Use the function selector to set the type of heating.
- 2. Set the temperature or grill setting using the temperature selector.
- 3. Press the 0 button twice.
- 00:00 is shown in the display. The time symbols light up and the brackets are around r.
- Default value for @ button = 30 minutes
- Default value for A button = 10 minutes
- The cooking time has elapsed
- Changing the cooking time
- Cancelling the cooking time
- Checking the time settings
- 1. Use the function selector to set the type of heating.
- End time
- 1. Adjust the function selector.
- 2. Set the temperature selector.
- 3. Press the 0 button twice.
- 4. Use the @ or A button to set the cooking time.
- 5. Press the 0 button.
- The brackets are around p. The time when the dish will be ready is displayed.
- The cooking time has elapsed
- Changing the end time
- Cancelling the end time
- Checking the time settings
- 1. Adjust the function selector.
- Clock
- Childproof lock
- Changing the basic settings
- Care and cleaning
- Notes
- Cleaning agents
- Cleaning the hook-in racks
- m Risk of burning due to hot components in the cooking compartment!
- 1. Push the hook-in rack upwards at the front and unhook to the side.
- 2. Pull the hook-in rack forwards at the rear and unhook to the side.
- 3. Clean the hook-in rack with washing-up liquid and a sponge or brush.
- 4. Align the hook-in rack with the indentation (a) facing upwards, so that the shelf heights match.
- 5. Insert the hook-in rack at the rear to the limit stop and push to the rear.
- 6. Insert the hook-in rack at the front to the limit stop and push downwards.
- 7. Push telescopic shelves in as far as the limit stop and close appliance door.
- Removing and fitting the appliance door
- m Risk of injury!
- m Risk of injury!
- Removing the appliance door
- 1. Open the appliance door fully.
- 2. Open the locking levers on the left and right-hand side fully.
- 3. Close the appliance door until resistance becomes noticeable (figure A)
- 4. With both hands, grip the door on the left and right-hand side, close the door a little more and pull it out (figure B).
- Fitting the appliance door
- 1. Insert the hinges in the left and right-hand holders (figure C).
- Cleaning the door panels
- m Risk of injury!
- m Risk of injury!
- Removing the door panel
- Note
- 1. Unhook the appliance door and lay it on a soft, clean surface with the front side facing downwards (see section: Removing and installing the appliance door).
- 1. Press the retainer on the intermediate panel on one side and unlatch it, using a spatula for instance (figure C).
- 1. Place the intermediate panel in the supports on the left and right (figure D).
- 1. Slide in the door panel all the way.
- Cleaning system
- Troubleshooting
- After-sales service
- Energy and environment tips
- Tested for you in our cooking studio
- Convenience products
- Acrylamide in foodstuffs
- Test dishes
8
Cooking time
The cooking time for your dish can be set on the oven. When
the cooking time has elapsed, the oven switches itself off
automatically. This means that you do not have to interrupt
other work to switch off the oven. The cooking time cannot be
accidentally exceeded.
Example in the picture: cooking time 45 minutes.
1. Use the function selector to set the type of heating.
2. Set the temperature or grill setting using the temperature
selector.
3. Press the 0 button twice.
00:00 is shown in the display. The time symbols light up and
the brackets are around
r.
4. Use the @ or A button to set the cooking time.
Default value for
@ button = 30 minutes
Default value for
A button = 10 minutes
The oven will start up after a few seconds. The cooking time
counts down in the display and the [
r] symbol lights up. The
other time symbols go out.
The cooking time has elapsed
A signal sounds. The oven stops heating. 00:00 is shown in the
display. Press the
0 button. You can set a new cooking time
using the
@ or A button. Or press the 0 button twice and turn
the function selector to the off position. The oven switches off.
Changing the cooking time
Use the
@ or A button to change the cooking time. After a few
seconds, the change is adopted. If the timer has been set,
press the
0 button beforehand.
Cancelling the cooking time
Use the
A button to reset the cooking time to 00:00. After a few
seconds, the change is adopted. The cooking time is
cancelled. If the timer has been set, press the
0 button
beforehand.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the
U timer, r cooking time, p end time or 0
clock, press the
0 button repeatedly until the brackets are
around the relevant symbol. The display shows the value for a
few seconds.
End time
You can change the time at which you wish your dish to be
ready. The oven starts automatically and finishes at the desired
time. You can, for example, put your dish in the cooking
compartment in the morning and set the cooking time so that it
is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
Example in the picture: it is 10:30 am, the cooking time is
45 minutes and the oven is required to finish cooking at
12:30 pm.
1. Adjust the function selector.
2. Set the temperature selector.
3. Press the 0 button twice.
4. Use the @ or A button to set the cooking time.
5. Press the 0 button.
The brackets are around
p. The time when the dish will be
ready is displayed.
6. Use the @ or A button to set a later end time.
After a few seconds, the oven adopts the settings and switches
to standby position. The time at which the dish will be ready is
shown in the display and the
p symbol is in brackets. The U
and
0 symbols go out. When the oven starts, you can see the
cooking time counting down in the display and the
r symbol is
in brackets. The
p symbol goes out.
The cooking time has elapsed
A signal sounds. The oven stops heating. 00:00 is shown in the
display. Press the
0 button. You can set a new cooking time
using the
@ or A button. Or press the 0 button twice and turn
the function selector to the off position. The oven switches off.
Changing the end time
Use the
@ or A button to change the end time. After a few
seconds, the change is adopted. If the timer has been set, first
press the
0 button twice. Do not change the end time if the
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
Use the
A button to reset the end time to the current time. After
a few seconds, the change is adopted. The oven starts. If the
timer has been set, first press the
0 button twice.