Operation Manual

11
Childproof lock
The oven has a childproof lock to prevent children switching it
on accidentally.
The oven will not react to any settings. The timer and clock can
also be set when the childproof lock has been switched on.
Switching on the childproof lock
Requirement: No cooking time should be set and the function
selector is in the zero position.
Press and hold the
D button for approx. four seconds.
The
D symbol appears in the display. The childproof lock is
switched on.
Switching off the childproof lock
Press and hold the D button for approx. four seconds.
The
D symbol on the display goes out. The childproof lock is
switched off.
Childproof lock with automatic programmes
When automatic programmes have been set, the childproof
lock is not operational.
Changing the basic settings
Your appliance has various basic settings which you can
change at any time.
Basic settings
In the table, you will find all the basic settings and options for
changing them.
Requirement: Your appliance is switched off.
1. Press and hold the 0 button for several seconds.
The first basic setting appears in the display.
2. Use the @ or A button to change the basic setting.
3. Confirm by pressing the 0 button.
The next basic setting appears in the display. You can go
through all of the basic settings using the
0 button and
make changes using the
@ or A button.
4. When finished, press and hold the 0 button for several
seconds.
All settings are applied.
You can change the settings at any time.
Care and cleaning
With careful care and cleaning your microwave oven will retain
its looks and remain good order. We will explain here how you
should care for and clean your appliance correctly.
: Risk of short circuit!
Never use high-pressure cleaners or steam cleaners to clean
the oven.
: Risk of burns!
Never clean the appliance immediately after switching off. Let
the appliance cool down.
Notes
■ Slight differences in colour on the front of the appliance are
caused by the use of different materials, such as glass,
plastic and metal.
■ Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
Basic setting Options Explanation
™‚
Clock display
‚ = on
Clock display
ƒ = off
Displays the clock
™ƒ
Signal duration:
ƒ= medium = 2 minutes
Signal duration:
‚ = short = 10 seconds
„ = long = 5 minutes
Signal after the cooking time has elapsed
™„
Button tone:
‚ = on
Button tone:
ƒ = off
Confirmation tone when a button is pressed
™…
Waiting time:
ƒ= medium = 5 seconds
Waiting time:
‚ = short = 2 seconds
„ = long = 10 seconds
Waiting time between two separate steps, after
setting
™†
Signal volume:
ƒ = medium
Signal volume:
‚ = low
„ = high
Volume of the signal