Operation Manual

9
Suitable types of heating
■ 5 Hot air
■ M Heated air grilling
■ 7 Hot air grilling
■ ( Grill, large area
■ * Grill, small area
Setting MicroCombi
Example: Microwave 360 W, 17 minutes and Hot air 5
190 °C.
1. Set the type of heating using the function selector, and the
temperature using the temperature selector.
2. Press the button for the microwave power setting you require.
A suggested cooking time appears.
3. Use the @ or A button to set the cooking time.
4. Press the n button.
Operation starts. The cooking time starts counting down.
The cooking time has elapsed
A signal sounds. Combination mode has finished. You can stop
the audible signal by pressing the
0 button.
Opening the oven door during cooking
Operation is suspended. After closing the door, press the
n
button briefly. The programme will then continue.
Pausing operation
Press the
n button briefly. The oven is paused. Press the
n button again to continue operation.
Changing the cooking time
This can be done at any time. Use the
@ or A button to change
the cooking time.
Changing the microwave power setting
Press the button for the new microwave power setting. Use
the
@ or A button to set the cooking time and restart the
microwave.
Cancelling operation
Press and hold the
n button for approximately 4 seconds or
turn the function selector and temperature selector back to the
off position.
1, 2, 3 series of operations
You can use the SeriesOperations function to set up to three
different microwave power settings and times and then start.
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting the Series of operations function
Set a cooking time for each operation in the series.
1. Set the function selector to Ý.
2. Press the 2 button.
The
ª for the first operation in the series appears on the
display.
3. Set the first microwave power setting and cooking time.
4. Press the 2 button.
The
« for the second operation in the series appears.
5. Set the second microwave power setting and cooking time.
6. Press the 2 button.
The
¬ for the third operation in the series appears.
7. Set the third microwave power setting and cooking time.
8. Press the n button.
Operation starts. The total cooking time appears.
The cooking time has elapsed
A signal sounds. The series of operations is finished. You can
stop the audible signal by pressing the
0 button.
Changing the setting
Changes can only be made before operation begins. Press the
2 button repeatedly until the number for the series of
operations appears. Change the setting.
Opening the oven door during cooking
Operation is suspended. After closing the door, press the
n
button briefly. The programme will then continue.
Pausing operation
Press the
n button briefly. The oven is paused. Press the
n button again to continue operation.
Cancelling operation
Press and hold the
n button for approximately 4 seconds or
turn the function selector to the off position.
Checking the cooking time
Press the
0 button twice.
Note: You can also combine a type of heating with the Series of
operations function. Set the type of heating first.
Setting the time-setting options
Your oven has various time-setting options. You can use the 0
button to call up the menu and switch between the individual
functions. All the time symbols are lit when you can make
settings. The brackets [ ] show you which time-setting option
you have currently selected. A time-setting option which has
already been set can be changed directly with the
@ or A
button when the relevant time symbol is in brackets.
Timer
You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has its own signal. In this way, you can
tell whether it is the timer or a cooking time which has elapsed.
1. Press the 0 button once.
The time symbols light up in the display and the brackets are
around
U.