Operation Manual

8
Initial setup
Once your new appliance has been connected to the power
supply, the "Basic settings" heading appears in the top line of
the display. Set the clock, and also the text display language, if
required. German is the default language.
Setting the clock and changing the language
1. Turn the rotary selector to set the current time.
2. Press the
X button.
"Sprache wählen: deutsch" appears.
3. Select the desired language using the rotary selector.
30 different languages are available.
4. Press the
0 button.
The language and time are applied. The current time is shown
in the display.
Note: You can change the language at any time. See the Basic
settings section.
Heating up the cooking compartment
To get rid of the new appliance smell, heat up the cooking
compartment when it is empty and the oven door closed.
Make sure that the cooking compartment contains no leftover
packaging, e.g. polystyrene pellets.
Keep the kitchen ventilated the whole time the oven is on.
Heat up the cooking compartment to 240 °C using Top/bottom
heating.
1. Press the
% button.
The initial display including descriptions of the buttons
appears.
2. Immediately press the
! button.
The heading "Types of heating" appears in the top line. 3D
hot air and a temperature of 160 °C are suggested in the
settings area. Brackets appear around the type of heating.
3. Turn the rotary selector to change the type of heating to Top/
bottom heating.
4. Press the
X button to switch to the temperature.
The brackets now appear around the temperature.
5. Use the rotary selector to set 240 °C.
6. Press the n button.
Operation starts. The "Types of heating" heading disappears.
7. Switch the oven off after 60 minutes using the
% button.
The temperature indicator bars show the residual heat in the
cooking compartment.
Cleaning the accessories
Before you use the accessories for the first time, clean them
thoroughly with hot soapy water and a soft dish cloth.
Switching the oven on and off
You can switch the oven on and off with the % button.
Switching on
Press the % button. The initial display with the description of
the buttons appears.
Select the function you require:
■ 90, 180, 360, 600 or 900 W button = microwave
■ ! button = types of heating
■ ` button = programmes
■ Þ button = MicroCombi
■ 2 button = series of operations
■ f button = saved memory settings
If you do not select an operating mode in the next few seconds,
the heading “Select function” appears.
A detailed description of how to make settings is provided in
the individual sections.
Switching off
Press the % button. The oven switches off.
Setting the oven
In this section, you will find information about
■ which types of heating are available in your oven
■ how you set a type of heating and a temperature
■ how you select a dish from the recommended settings
■ and how you set rapid heating
Types of heating
A large number of types of heating are available for your oven.
You can therefore select the best method for preparing any
meal.

&ORFN
%DVLFVHWWLQJV

([LWZLWK
7\SHVRIKHDWLQJ
3URJUDPPHV
0LNUR&RPEL
Types of heating
and temperature
ranges
Application
3D hot air
30-250 °C
For baking cakes and small baked
items on two levels.