Interactive User Manual
Table Of Contents
- Built-in oven
- Table of Contents Use and care manual
- Produktinfo
- IMPORTANT SAFETY INSTRUCTIONS
- READ AND SAVE THESE INSTRUCTIONS
- Proper Installation and Maintenance
- Fire Safety
- WARNING
- WARNING
- WARNING
- TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A GREASE FIRE, OBSERVE THE FOLLOWING:
- a. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.
- b. NEVER PICK UP A FLAMING PAN – You may be burned.
- c. DO NOT USE WATER, including wet dishcloths or towels – a violent steam explosion will result.
- d. Use an extinguisher ONLY if:
- Burn Prevention
- Child Safety
- Cleaning Safety
- Cookware Safety
- Proposition 65 Warning:
- Causes of Damage
- Protecting the environment
- Getting to know the appliance
- Note:
- Parts
- Control panel
- Operating controls
- Buttons and touch fields
- Rotary selector
- Display ring
- Temperature display
- Touch-screen displays
- Default values
- Opening the appliance door
- Interior lighting
- Cooling fan
- Accessories Included
- Inserting accessories
- Locking function
- Special accessories
- With HomeConnect
- On the appliance
- Setting the language
- Setting the time
- Cleaning the cooking compartment
- Cleaning the accessories
- Switching on the appliance
- Switching off the appliance
- Pausing the operation
- Changing
- Setting
- Cancelling
- Setting
- Changing and cancelling
- Setting
- Changing and cancelling
- Setting
- Changing and cancelling
- Cancelling
- List of basic settings
- Power failure
- Changing the time
- 2. Touch the "Basic settings" text field.
- 3. Touch the "Clock" text field.
- 5. Touch the menu field to confirm.
- 3. Before starting the operation, touch the "Cooking time" text field.
- 4. Set the required cooking time using the rotary selector.
- 5. Press the Start/Stop button l to start.
- Changing and cancelling
- FCC COMPLIANCE STATEMENT
- INDUSTRY CANADA STATEMENT
- Cleaning Enamel Surfaces
- Cleaning self-cleaning surfaces
- Before running the cleaning function
- Cleaning the cooking compartment floor and the inside of the appliance door
- Setting the cleaning function
- Setting a later end time
- Cancelling
- Once the cleaning function has ended
- Detaching and refitting the rails
- Detaching the rails
- Attaching the rails
- Removing and fitting the appliance door
- Removing the appliance door
- Refitting the appliance door
- Removing the door cover
- Removing and installing the door panels
- Removing door panels from the appliance
- Refitting door panels on the appliance
- Error messages on the display
- Maximum operating time
- Replacing the cooking compartment bulb on the ceiling
- 3. Pull out the bulb – do not turn it (figure "). Insert the new bulb, making sure that the pins are in the correct position. Push the bulb in firmly.
- 4. Screw the glass cover back on. Depending on the appliance model, the glass cover may have a sealing ring. If the glass cover has a sealing ring, put it back in place before screwing the cover back on.
- 5. Remove the dish towel and switch on the circuit breaker.
- Glass cover
- Customer Service
- STATEMENT OF LIMITED PRODUCT WARRANTY
- Dishes
- 2. Touch the "Assist" text field.
- 3. Touch the required category.
- 4. Touch the required food.
- 5. Touch the required dish.
- 6. Press the Start/Stop button l to start.
- Continue cooking
- Setting a later end time
- Changing and cancelling
- Rack positions
- Accessories
- Recommended setting values
- Tips on baking
- Rack positions
- Accessories
- Frozen Products
- Recommended Setting Values
- Rack positions
- Accessories
- Frozen Products
- Recommended Setting Values
- Rack positions
- Accessories
- Recommended Setting Values
- Roasting in Cookware
- Recommended Setting Values
- Roasting and Braising
- Roasting and Braising in Cookware
- Broiling
- Recommended Setting Values
- Tips for Roasting and Braising
- Roasting and Steaming in Cookware
- Recommended Setting Values
- Rack positions
- Accessories
- Recommended Setting Values
- Cookware
- Recommended Setting Values
- Recommended Setting Values
- Recommended Setting Values
- Recommended Setting Values
17
Time-setting Options
Your appliance has different time-setting options.
You can call up the cooking time and the end time after
setting an operation using the touch-screen displays. The
timer has a separate field
| and can be adjusted at any
time.
An audible signal will sound once the cooking time or
timer duration has elapsed. You can cancel the audible
signal early by touching a field or touch-screen display.
Note: You can change how long the audible signal
sounds for in the basic settings.
Setting the cooking time
You can set the cooking time for your food on the
appliance. This prevents the food from accidentally being
cooked for too long, and means that you do not have to
stop what you are doing to switch off the oven.
Setting
Depending on which direction you turn the rotary selector
first, the cooking time starts at a particular default value:
Left = 10 minutes, right = 30 minutes.
The cooking time can be set in one-minute increments
up to one hour, and then in five-minute increments.
The maximum time that can be set is 23 hours and 59
minutes.
Example in the picture: It is 10:00, cooking time of 45
minutes.
1.
Set the operating mode and temperature or level.
2.
Before starting the operation, touch the "Cooking time"
text field.
The cooking time is highlighted in white in the display.
3.
Turn the rotary selector to set the cooking time.
The end time is calculated automatically.
4.
Press the Start/Stop button l to start.
The cooking time counts down.
The appliance begins to heat up.
Once the cooking time has elapsed, an audible signal
sounds. The appliance stops heating up. The cooking
time 00 m 00 s is shown in the display.
You can reset the cooking time using the "Cooking time"
text field or you can press the l Start/Stop button to
continue the operation without a cooking time.
When your dish is ready, use the ÿ On/Off button to
switch off the appliance.
Changing and cancelling
To change the cooking time, touch the "Cooking time"
text field. The cooking time is highlighted, and can be
changed using the rotary selector. The change is applied
immediately.
If you want to cancel the cooking time, reset the cooking
time to zero. After the change has been adopted,
operating continues without a cooking time.
Setting the end time
You can delay the time at which cooking is due to finish.
You can, for example, put your food in the cooking
compartment in the morning and set the cooking time so
that it is ready at lunch time.
Notes
▯ Ensure that food is not left in the cooking compartment
for too long, as it may spoil. PLEASE OBSERVE ALL
SAFE FOOD HANDLING PRACTICES TO ENSURE
FOOD SAFETY.
▯ Do not adjust the end time once the operation has
started. The cooking result would no longer be correct.
Time-setting
option
Use
q
Cooking
time
Once the set cooking time has
elapsed, the appliance will automati-
cally stop heating.
r
End Enter a cooking time and the
required end time. The appliance will
start up automatically so that it fin-
ishes cooking at the required time.
t
Timer The timer functions like an egg timer.
It runs independently of the operation
and the other time-setting options.
After the set time has elapsed, the
appliance does not switch on or off
automatically.
T
P
V
(QG
&RRNWLPH
)
7HPSHUDWXUH
%DNH
+HDWLQJPRGH
&RRNWLPH
P
V
a
)
&RRNWLPH
PV
(QG