User Manual

English 26
To replace the oven door:
3. Bring both door hinge
levers to their fullest
down position as
shown in the
illustration. The left
and right door hinges
differ slightly but
operate in the same
manner.
4. Close the oven door
until it catches on the
hinge stop levers. The
door will be open
about 7 inches at the
top. This takes the
spring tension off the
hinges so the door can
be easily lifted out.
5. The door is heavy.
Use both hands to
firmly grip it by the
sides and lift the door
up until the hinges
clear the slots in the
oven housing.
6. Place the door in a
convenient and stable
location for cleaning.
1. Holding the door firmly
in both hands, place
hinges in hinge slots.
2. Catch the small slot at
the base of the hinge
(A) in the bottom of the
hinge slot (B) in the
oven body.Then tilt the
door inward and slide
the hinges into place.
The door should catch
at this point and
remain firmly attached
to the oven body.
3. Open the door all the
way to expose the
hinges and slots.
4. Push both hinge
levers down and away
from you until flush
with the face of the
oven body.
5. Close and open door
slowly to be sure it is
correctly and securely
in place. Door must be
straight, not crooked.