How to Guide

EN6

Step 2.2: Connect your extractor hood to

your WLAN home network (Wi-Fi) step by

step

Please enter step 2.2 only when prompted to by the app.

The following steps describe operations at the home

appliance itself.

Note:

To connect the hood to your home network, the

hood and the light must be off. You can cancel the

process at any time by pressing "0".

1 | Press and hold the "CONNECT" button until "on/o" and

"CONNECT" ash.

2 | Press "2".

"2" and "CONNECT" will ash.

3 | Follow the instructions in the app.

The appliance will open a temporary Wi-Fi network

called "HomeConnect" for 2 minutes with the password

"HomeConnect".

The app provides your home Wi-Fi network name

(SSID) and its password via this temporary Wi-Fi

network to the hood enabling the hood to connect

to your home Wi-Fi network.

When "CONNECT" and "3" ashes your hood is connected

to the home network.

4 | Follow the instructions in the app.

Information:

For some appliances the step-by-step mode is also

called "SAP mode" or "manual mode".

If the step-by-step mode does not work please

check:

- Your appliance is in the range of the WLAN home

network (Wi-Fi).

- Your smartphone/tablet is connected to your

WLAN home network (Wi-Fi).

- Your smartphone/tablet and appliance are

connected to the same WLAN home network

(Wi-Fi).