Specification

ManualsBrandsBosch ManualsAppliances800 Series 30 in. Telescopic Downdraft System in Stainless Steel, Blower Sold Separately

Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).

Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and speciﬁcations, at any time, without

notice. Consult the product’s installation instructions for ﬁnal dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty.

For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

HDD80050UC

Stainless Steel

Sleek, built-in, and

retracts out of sight.

Bosch 30" Downdraft's

ﬂexible design seamlessly

integrates into your

kitchen

Features & Beneﬁts

Beautifully designed to

preserve clean sight lines

when not in use

Quiet at 2.1 sones* on low

speed

Sleek front panel ﬁlter

design acts as a guard

against splatters

5 exhaust connections

possible (transition sold

separately)

Recirculation kit for sale,

use with induction/electric

cooktops only**

Accessories—Required

Blower (sold separately)

Accessories—Transitions & Blowers

6" side/rear transition HDDSTRAN6

8" side/rear transition HDDSTRAN8

NOTE: HDDSTRAN6 or HDDSTRAN8 required for side or

rear exhaust applications with inline and remote blowers.

6" round front plate HDDFTRAN6

8" round front plate HDDFTRAN8

NOTE: HDDFTRAN6 or HDDFTRAN8 required for front

exhaust applications with inline and remote blowers.

Transition for

rectangular duct

HDDSTRAN2

2' rectangular duct HDD2RECTD

NOTE: HDDSTRAN2 needed to attach HDD2RECTD to

downdraft. For use with installation of inline or remote

blower applications.

600 CFM ﬂexible blower DHG602DUC

600 CFM inline blower DHG6015NUC

600 CFM remote blower DHG6023RUC

Accessories—Optional

Recirculation kit HDDREC5UC

Charcoal ﬁlter

replacement for

recirculation kit

HDDFILTUC

30" gas cooktop seal

kit for downdraft

(required for installation

with gas cooktops)

HDD0RSP

General Properties

Operating mode Convertible:

ducted /

recirculating

Maximum CFM Blower sold

separately

Sones* 2.1 WS / 11.8 HS

Number of speed

settings

3-stage

Motor location External

Damper included No

Grease ﬁlter material Aluminum

Grease ﬁlter type Multilayer cassette

Duct direction Front, Left, Right,

Rear

Optional blower

required

Yes (600 CFM

options sold

separately)

Technical Details

Volts (V) 120 V

Frequency (Hz) 60 Hz

Plug type 120V-3 prong

Power cord length (in.) 30"

Dimensions & Weight

Overall appliance

dimensions (width

of canopy included)

(HxWxD) (in.)

29 3/8" x 31" x

2 3/4"

Height of the rise (in.) 12"

Diameter of air duct (in.)

internal

Diameter of air duct (in.)

external

6" or 8"

Net weight (lbs) 37 lbs

30" Downdraft

800 Series Downdraft – HDD80050UC

*Sound test performed as per HVI standards at independent lab.

* *Recirculation kit (sold separately) is not compatible with gas cooktop installations with downdraft.

Summary of content (13 pages)

PAGE 1
30" Downdraft 800 Series Downdraft – HDD80050UC General Properties Operating mode HDD80050UC Stainless Steel Sleek, built-in, and retracts out of sight. Bosch 30" Downdraft's flexible design seamlessly integrates into your kitchen Features & Benefits Beautifully designed to preserve clean sight lines when not in use Quiet at 2.
PAGE 2
30" Downdraft 800 Series Downdraft – HDD80050UC Installation Details PRODUCT CLEARANCES Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST). Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice.
PAGE 3
0" Downdraft 800 Series Downdraft – HDD80050UC Installation Details – Cutouts GAS Template 2-1/8" (54) 24-11/16" (628) 22-5/16" (567) Downdraft cutout width: 30" (762) is 27-1/16" (687) 36" (914) is 33-1/16" (840) 19-1/8" (486) 1-1/16" (27) BT MIN.
PAGE 4
30" Downdraft 800 Series Downdraft – HDD80050UC Accessories – Transitions SIDE/REAR TRANSITIONS FOR DOWNDRAFT ROUND FRONT PLATES FOR DOWNDRAFT 6" Round transition enable ducting to be at sides or rear of downdraft for flexible configurations to maximize your kitchen design HDDSTRAN6 6" Side/Rear Transition for Downdraft Flexible transition design allows for left, right or rear venting Front rough-in plate may be used with a 6" round duct or elbow Ability to use with DHG6015NUC inline or DHG6023RUC r
PAGE 5
30" Downdraft 800 Series Downdraft – HDD80050UC Accessories – Transitions TRANSITION FOR RECTANGULAR DUCT FOR DOWNDRAFT 2' RECTANGULAR DUCT FOR DOWNDRAFT 2' Rectangular duct can be used as extension to exhaust through a cabinet or wall while maximizing cabinet storage space Rectangular duct transition required to connect 2’ rectangular duct to downdraft HDDSTRAN2 Transition for Rectangular Duct for Downdraft HDD2RECTD 2' Rectangular Duct Downdraft D uct can be used as an extension to exhaust through
PAGE 6
30" Downdraft 800 Series Downdraft – HDD80050UC Accessories – 600 CFM Blowers 600 CFM inline blower DHG6015NUC 600 CFM Inline Blower or use with Bosch downdrafts F Inline blowers can be mounted remotely to minimize blower noise in the cooking area Designed to be mounted inline with the ducting installation. Blower is mounted on roof of exterior wall depending on application needs.
PAGE 7
30" Downdraft 800 Series Downdraft – HDD80050UC Accessories – Optional Maintain performance of Bosch downdraft recirculation kit with timely replacement of charcoal filter to capture and filter odors When ducting to the exterior is not feasible, downdraft recirculation kit allows filtered air to reenter the kitchen while cooking HDDREC5UC Recirculation Kit for Downdraft When ducting is not feasible, kit eliminates need to exhaust outside Air is filtered through charcoal filter, then re-enters kitchen
PAGE 8
30" Downdraft 800 Series Downdraft – HDD80050UC Flexible Blower Installation – Front Exhaust Example Application • Flexible blower attached can rotate for left, right or downward discharge • Front downward application with flexible blower • Requires space under floor line for ductwork* • Can be used with optional Recirculation Kit, sold separately • Elbow, ductwork, blower support structure frame not included Required Blower DHG602DUC 600 CFM Flexible Integral Blower 600 CFM flexible blower can m
PAGE 9
30" Downdraft 800 Series Downdraft – HDD80050UC Flexible Blower Installation – Front Exhaust with Flexible Blower Used as an Inline Option Example Application • Side exhaust with flexible blower used as inline option if ducting is more convenient with this configuration • Requires at least 18" of clearance to fit the blower and transition • Blower must be accessible for maintenance • Elbow, ductwork, blower support structure frame not included Required Blower DHG602DUC 600 CFM Flexible Integral Blow
PAGE 10
30" Downdraft 800 Series Downdraft – HDD80050UC Flexible Blower Installation – Side Exhaust Example Application • Side exhaust option if ducting is more convenient with this configuration • Requires at least 18" of clearance to fit the blower and transition • Can be used with optional Recirculation Kit, sold separately • Elbow, ductwork, blower support structure frame not included Required Blower DHG602DUC 600 CFM Flexible Integral Blower 600 CFM flexible blower can mount to downdraft or be used a
PAGE 11
30" Downdraft 800 Series Downdraft – HDD80050UC Flexible Blower Installation – Side Exhaust with Slim 2' Rectangular Duct Example Application • Side exhaust option if ducting is more convenient with this configuration •A slim 2' rectangular duct is available to place flexible blower in areas such as unused corner in island or peninsula applications •C an be used with optional Recirculation Kit, sold separately •E lbow, ductwork, blower support structure frame not included Required Blower DHG602D
PAGE 12
30" Downdraft 800 Series Downdraft – HDD80050UC Flexible Blower Installation – Rear Exhaust Example Application • Rear exhaust option is possible if ducting is more convenient with this configuration • Requires at least 18" of clearance to fit the blower and transition • Blower must be accessible for maintenance • Can be used with optional Recirculation Kit, sold separately • Elbow, ductwork, blower support structure frame not included Required Blower DHG602DUC 600 CFM Flexible Integral Blower 600 C
PAGE 13
30" Downdraft 800 Series Downdraft – HDD80050UC Flexible Blower Installation – Recirculation Example Application • Allows for non-ducted downdraft installation by eliminating the need to exhaust to the exterior of the home • Mount to toe kick or base of a cabinet and attach directly to flexible blower •R ecirculation module and metal grill vent plate placement can be rotated for flexible exhaust placement • Elbow, ductwork, blower support structure frame not included Required Blower DHG602DUC 600