Use and Care Manual

Before using for the first time en-us
19
CAUTION
To avoid possible injury or damage to the appliance,
ensure oven rack is installed exactly per installation
instructions and not backwards or upside down.
Always push racks in fully so that they do not touch the
door panel. Make sure that you always insert the racks
into the oven cavity the right way, and not backwards or
upside down.
Flat rack
The rack is designed with a stop so it will stop before
coming completely out of the oven.
Inserting the wire rack into oven
1. Grasp the rack firmly on both sides.
2. Insert the rack.
3. Tilt the rack up to allow the stop to slide onto the rack
guide.
4. Bring the rack to a horizontal position and push it in the
rest of the way.
The rack should be straight and level.
Removing the flat rack from the oven
1. Grasp the rack firmly on both sides and pull it toward
you.
2. When the stop is reached, tilt the rack up and pull it out
fully.
5.4 Griddle
To cook most foods on the griddle, the surface must be
pre-heated.
The burner power may require adjustment if the griddle is
used for a long time.
5.5 Installing the griddle
The griddle is customized to fit only on the grates
illustrated below.
WARNING
Place and remove the griddle only when all grates and the
griddle have cooled down and all burners are off.
Before using for the first time
6 Before using for the first time
Before using for the first time
Carry out these steps before using your appliance.
¡ The appliance must be properly installed by a qualified
service provider before use.
¡ Read and understand all safety precautions → Page3
and information in the Use and Care Manual prior to
operating.
¡ This Use and Care Manual covers several models. Not
all features are available on all models.