Use and Care Manual

en-us Oven operation
30
Display Function Options
Signal duration upon completion of a
cooking time or timer duration
= approx. 10seconds
= approx. 30seconds
1
⁠ ⁠ ⁠ = approx. 2minutes
⁠ Waiting time until a setting is applied ⁠ = approx. 3seconds
1
⁠ = approx. 6seconds
= approx. 10seconds
Button tone that sounds when a button
is touched
= off
= on
1
Brightness of the display illumination = dim
= medium
1
= bright
Displays the clock time = hide the clock
= display the 12-hour clock
1
= display the 24-hour clock
Interior lighting on when appliance in
operation
= no
= yes
1
Cooling fan run-on time °F / °C = At over 284°F/
140°C
1
°F / °C = At over 230°F/
110°C
°F / °C = At over 176°F/
80°C
°F / °C = At over 140°F/
60°C
Reset all values to factory settings = no
1
= yes
Activate demo mode. Demo mode is
used for demonstration purposes – the
oven does not actually heat in demo
mode. Demo mode can only be
activated within 5 minutes of
connecting the appliance to the mains
power supply.
= no
1
= yes
Set the temperature unit. = Fahrenheit (°F)
1
= Celsius (°C)
Sabbath mode available = no
= yes
1
1
Factory setting (may vary according to model)
Changing the basic settings
The function selector must be set to the "Off" position.
1. Press and hold the button for approx. 4seconds. The
first basic setting appears on the display, e.g., ⁠ ⁠ ⁠ ⁠ ⁠.
2. Press the button again to change the selected basic
setting.
3. Use the or button to change the basic setting.
4. Press the button again to save the basic setting.
5. Use the button to navigate to the next basic setting.
6. Use the or button to continue going through all of
the basic settings as described above and use the
button to select and change the settings if necessary.
7. When you have finished, press and hold the button
again for approx. 4seconds to confirm the settings. This
applies all the basic settings.
a This applies all the basic settings.
Note
¡ You can change the basic settings again at any time.
Demo mode can only be activated within 5 minutes of
connecting the appliance to the mains power supply.
¡ Your changes to the basic settings will be retained even
after a power failure.