Installation guide

D9412GV3/D7412GV3 | Operation and Installation Guide | Contents
.
Bosch Security Systems, Inc. | 10/10 | F01U143070-03 5
8.5
Wiring Information for Installations Using the
Rothenbuhler 5110/4001-42 High Security
Bell.....................................................................33
9.0 Off-Board Points............................................36
9.1 Point (Zonex) Bus: D9412GV3 Terminals and
D7412GV3 Terminals .....................................36
9.1.1 POPIT Modules................................................36
9.1.2 POPEX Modules..............................................36
9.1.3 Missing Conditions ..........................................36
9.1.4 Extra Point Events...........................................36
9.1.5 D9412GV3/D7412GV3 Responses to Missing
Point Conditions...............................................37
9.2 D8125 and D9127 POPIT Modules ..............37
9.3 Installing the D8125 POPEX Module............40
9.3.1 Mounting ...........................................................40
9.3.2 Wiring the D8125 to the Control Panel.........40
9.3.3 Wiring POPITs to the Data Expansion Loop40
9.3.4 Wiring Data Expansion Loops to POPEX
Modules.............................................................41
9.3.5 POPIT Sensor Loops......................................41
9.3.6 POPIT Module Point Assignments................41
9.3.7 Program Record Sheet...................................41
9.3.8 POPIT Labels...................................................42
9.4 D8128D OctoPOPIT Module .........................42
9.4.1 Description........................................................42
9.4.2 Listings ..............................................................43
9.4.3 Installation.........................................................44
9.4.4 Setting the OctoPOPIT Switches ..................44
9.4.5 Mounting OctoPOPITs....................................45
9.4.6 Wiring OctoPOPITs.........................................45
9.4.7 OctoPOPIT Sensor Loops..............................49
9.5 Testing Off-Board Points ................................49
10.0 Off-Board Relays.................................................50
10.1 D8129 OctoRelay ............................................50
10.1.1 Configuring the D8129 OctoRelay ................51
10.1.2 Relay Outputs ..................................................51
10.1.3 Installation.........................................................51
10.1.4 Wiring Connections .........................................52
10.2 D811 Arm Status Relay Module....................52
10.2.1 Relay Output ....................................................52
10.2.2 Installation.........................................................52
10.2.3 Wiring Connections .........................................53
11.0 Arming Devices...................................................55
11.1 Description........................................................55
11.2 Keypad Terminals 29 to 32 ............................55
11.2.1 Assigning an Address for the Keypad ..........55
11.2.2 Installation.........................................................56
11.3 D279A Independent Zone Control................57
11.4 Keyswitch .........................................................57
11.4.1 Description .......................................................57
11.4.2 Programming ...................................................57
11.4.3 Installation ........................................................57
11.4.4 Operation..........................................................57
12.0 SDI Devices ..........................................................59
12.1 Description .......................................................59
12.2 Installation ........................................................59
12.3 D9131A Parallel Printer Interface Module ...59
12.3.1 Switch Settings ................................................59
12.3.2 Supervision.......................................................59
12.4 D9210B Wiegand Control Interface Module 60
12.4.1 Access ..............................................................60
12.4.2 Switch Settings ................................................60
12.5 SDI Addresses 88 and 92 ..............................60
12.5.1 D9133DC Direct Connect Programming
Module ..............................................................60
12.5.2 Network Interface Modules ............................61
12.5.3 Address Settings .............................................61
12.5.4 Supervision.......................................................61
13.0 Programmer and Accessory Connections...62
13.1 Programmer Connector..................................62
13.2 Installer Keypad and Local Programmers
Mode .................................................................62
13.3 Programmer Access Reports ........................62
13.4 Accessory Connector......................................63
14.0 Faceplates ............................................................64
14.1 D9412GV3 Faceplate .....................................64
14.2 D7412GV3 Faceplate .....................................65
Appendix A: System Wiring Diagrams, Issue A..66
A.1 D9412GV3 Control Panel ..............................66
A.2 D7412GV3 Control Panel ..............................69
Appendix B: Point Address Charts ........................72
B.1 Zonex 1, Points 9 to 127 (D9412GV3); Zonex
1, Points 9 to 75 (D7412GV3) .......................72
B.2 Zonex 2, Points 129 to 247 (D9412GV3 Only)
...........................................................................73
Specifications...............................................................74
SDI Bus A (+): ................................................................74
Connection: ....................................................................74
Two Telco lines:.............................................................74
Discharge Cycle.............................................................74