Installation Guide

en-us Before you begin
6
Before you begin
2 Before you begin
Before you begin
2.1 Tools and parts needed
¡ Cross head screwdriver
¡ Slotted screwdriver 1/8" (3,5mm)
¡ Adjustable wrench
¡ Tongue and groove pliers
¡ Socket or flat wrench 3/8” (10mm) or tongs
¡ Socket or flat wrench 7/8” (22 mm) or tongs
¡ Drill with 5/16" (8mm) bit
¡ Pencil
¡ Measuring tape
Only needed for appliances without power cord:
¡ Tube hexagonal wrench with nut head 3/8” (10mm)
¡ Tube hexagonal wrench with nut head 5/16” (8mm)
¡ Power supply cord (only for USA)
2.2 Parts included
2.3 Other accessories
You can purchase other accessories from our Customer
Service, specialist retailers or online.
You will find a comprehensive range of products for your
appliance in our brochures and online:
www.bosch-home.com
Accessories are appliance-specific. When purchasing, al-
ways check for compatibility with your appliance model
number (E-Nr).
You can find out which accessories are available for your
appliance in our online shop or from our Customer Ser-
vice.
Side panel extension
Use
¡ Side cover for appliances without adjacent kitchen units.
¡ Order number: HEZ9YZ04UC
Toe kick plate for 30" appliances
Use
¡ Toe kick plate to conceal the appliance feet.
¡ Order number: HEZ9TK30UC
Toe kick plate for 36" appliances
Use
¡ Toe kick plate to conceal the appliance feet.
¡ Order number: HEZ9TK36UC
Metal range feet
Use
¡ Set (4 pcs.) of premium range feet.
¡ Order number: HEZ9LLUC
2.4 Removing packaging
See the diagram on the packaging.
1. If straps are present, cut the straps.
2. Cut the plastic down the back of unit making sure not to
cut the unit.
3. Remove the plastic film.
4. Lift the cardboard carton from the top of the range and
dispose of it.
5. Remove the corner posts, making sure that any other
packaging materials running between the corner posts
are also removed.
6. Remove all internal packaging and tape.
7. The rear vent trim is nested in the styrofoam packaging
for shipping purposes. Do not throw it away.