Instruction manual

Trouble shooting en
21
4. Lift the panel up and pull it out (fig. C).
Clean the panels with glass cleaner and a soft cloth.
:Warning – Risk of injury!
Scratched glass in the appliance door may develop into
a crack. Do not use a glass scraper, sharp or abrasive
cleaning aids or detergents.
Installation
During installation, make sure that the lettering "top
right" is upside down at the bottom left.
1. Insert the panel at an angle towards the back
(fig. A).
2. Insert the top panel at an angle towards the back
into the brackets. The smooth surface must face
outwards. (fig. B).
3. Put the cover back in
place and press on it.
4. Attach the oven door.
Do not use the oven again until the panels have been
correctly installed.
3Trouble shooting
Tr oubl e shoot i ng If a fault occurs, there is often a simple explanation.
Before calling the after-sales service, please refer to the
fault table and attempt to correct the fault yourself.
Malfunction table
If your meal is not successful, please refer to section .
We have tested the recipe for you in our cooking studio
. Here,
you will find useful cooking tips and tricks for cooking,
baking and roasting.
:Warning – Risk of electric shock!
Repairs that are not carried out properly are dangerous.
Repairs must only be performed by one of our after-
sales service technicians.
&
%
$
Malfunction Possible cause Remedy/information
The oven does
not work.
The circuit
breaker is defec-
tive.
Look in the fuse box to see if
the circuit breaker is defective.
Power cut. Check whether the kitchen light
and other kitchen appliances
are working.
Oven not hot. Dust on the con-
tacts.
Turn the control knobs several
times to the left and right.