Manual
Table Of Contents
- Microwave
- Table of ContentsUse and care manual
- Produktinfo
- IMPORTANT SAFETY INSTRUCTIONS
- READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
- 3. Unplug the appliance or shut off at fuse or circuit breaker
- Liquids
- Cooking Items
- Cooking Utensils
- Glass Tray / Turntable Ring
- Exhaust Mode Operation
- Thermometers
- Pacemakers
- State of California Proposition 65 Warnings
- Fan Motor Operation
- Room Venting with Carbon Filter
- SAVE THESE INSTRUCTIONS.
- Causes of damage
- Protecting the environment
- Getting started
- Parts
- Control panel
- Accessories
- How to fit the turntable
- 1. Place the roller rest a in the recess in the oven cavity.
- 2. Let the turntable b slot in place in the drive c in the center of the floor of the oven cavity.
- 2. Place equal amounts of food both above and below rack.
- 1. Heat the empty ovenware at maximum power for ½ to 1 minute.
- Before using the appliance for the first time
- Operation
- Setting the clock
- Setting the Kitchen Timer
- Operating the Ventilation Fan
- Turning the Surface Light on/off
- Turning the turntable on / off
- Operating the microwave
- 1. Enter the desired cooking duration with the number keys. The timer display will fill in from right to left. Example: To set a microwave cooking time of 20 minutes and 30 seconds, enter the numbers 2 0 3 0. START is blinking.
- 3. Enter the desired power level using the number keys. ˜–and the selected power level and START are blinking in the display.
- 4. Touch Start/Enter to start microwave operation.
- Adding cook time (+30 Seconds)
- Auto Defrost
- Setting Auto Defrost
- 1. Touch Auto Defrost once. š“”‚ and START are blinking and the à symbol lights up in the display.
- 2. Touch Auto Defrost repeatedly until the desired program number is shown in the display. Check the menu label at the bottom of the oven cavity or see program table below.
- 3. Touch Start/Enter. ‹.‹ lb is blinking in the display.
- 4. Enter the weight of the food using the number keys.
- 5. Touch Start/Enter to start the program.
- Note:
- Opening appliance door during operation
- Cancel operation
- Auto Defrost programs
- Tips for defrosting
- Defrosting suggestions for meat
- Setting Auto Defrost
- Sensor Reheat
- Sensor Cook
- Panel Lock
- Settings
- 4. Touch Clear/Off to exit the settings menu.
- 3. Touch Start/Enter.
- Notes
- Cancel operation
- More Modes
- Available modes
- Setting More Modes
- 1. Touch More Modes once. ‚ and START are blinking in the display.
- 2. Touch More Modes repeatedly until the desired program number is shown in the display. Check the menu label at the bottom of the oven cavity or see program table above.
- 3. Touch Start/Enter. For modes 1 to 4:‚ and START is blinking on the display. For mode 5: ‹‹:‹‹ is blinking in the display.
- 4. Enter the desired weight category (mode 1 - 4) or enter the desired defrost time (mode 5) with the number keys.
- 5. Touch Start/Enter to start operation.
- Cancel operation
- Cooking Charts
- Cleaning and Maintenance
- 9 WARNING
- Cleaning
- Cleaning Guide
- Cleaning the oven vent filters
- 9 CAUTION
- 1. To remove the ventilation filters, slide the filter to the rear. Then pull filter downward and push to the other side. The filter will drop out. Repeat for the 2nd filter.
- 2. Soak the ventilation filters in hot water using a mild detergent. Rinse well and shake to dry. Do not use ammonia or wash in a dishwasher. The aluminum on the filter will corrode and darken.
- 9 CAUTION
- 3. To reinstall an oven ventilation filter, slide it into the side slot, then push up and toward oven to lock. Reinstall the 2nd filter using the same procedure.
- Maintenance
- Troubleshooting
- Bosch® Support
- STATEMENT OF LIMITED PRODUCT WARRANTY
- ContenidoManual de instrucciones
- Produktinfo
- INSTRUCCIONES DE SEGURIDAD IMPORTANTES
- LEER TODAS LAS INSTRUCCIONES ANTES DE UTILIZAR EL APARATO
- 3. Desenchufe el electrodoméstico o corte la alimentación eléctrica desde el panel de fusibles o el disyuntor.
- Liquidos
- Artículos de cocina
- Utensilios de cocina
- Charola de vidrio/anillo de la bandeja giratoria
- Operación en modo de salida
- Termómetros
- Marcapasos
- Advertencias en virtud de la Proposición 65 del estado de California
- Funcionamiento del motor del ventilador
- Ventilación de ambiente con filtro de carbón
- CONSERVE ESTAS INSTRUCCIONES.
- Causas para los daños
- Protección del medio ambiente
- Cómo comenzar
- Componentes
- Panel de control
- Accesorios
- Para colocar la bandeja giratoria
- 1. Colocar el anillo de la bandeja giratoria a en la hendidura del compartimento de cocción.
- 2. Enclavar la bandeja giratoria b en el accionamiento c del centro de la base del compartimento de cocción.
- 2. Coloque la misma cantidad de alimentos encima y debajo del rack.
- 1. Introducir el recipiente vacío en el aparato durante ½ a 1 minuto a la potencia máxima.
- Antes de usar el horno por primera vez
- Operación
- Programación del reloj
- Programación del temporizador de cocina
- Manejo del ventilador de ventilación
- Encendido/Apagado de la luz de superficie
- Encendido/Apagado del plato giratorio
- Programación del microondas
- 1. Ingrese la duración de cocción deseada con las teclas numéricas. El display del temporizador se llenará de derecha a izquierda. Ejemplo: para programar un tiempo de microondas de 20 minutos y 30 segundos, ingrese los números 2, 0, 3, 0. Titil...
- 3. Ingrese el nivel de potencia deseado utilizando las teclas numéricas. Titilan ˜– y el nivel de potencia seleccionado, y START (Comenzar) en el display.
- 4. Pulse la tecla Start/Enter para iniciar el funcionamiento del microondas.
- Añadido de tiempo de cocción (+30 Seconds [+30 segundos])
- Auto Defrost (Descongelar automáticamente)
- Programación de Auto Defrost (Descongelar automáticamente)
- 1. Presione una vez Auto Defrost (Descongelar automáticamente). Titilan š“”‚ y START (Comenzar) y se enciende el símbolo à en el display.
- 2. Pulse Auto Defrost repetidamente hasta que se muestre el número de programa deseado en el display. Verifique la etiqueta del menú en la parte inferior de la cavidad del horno o consulte la tabla de programas que figura a continuación.
- 3. Pulse Start/Enter (Comenzar/Intro). Titila ‹.‹ lb en el display.
- 4. Ingrese el peso del alimento con las teclas numéricas.
- 5. Pulse Start/Enter para iniciar el programa.
- Nota:
- Abertura de la puerta del aparato durante el funcionamiento
- Cancelación del funcionamiento
- Programas Auto Defrost (Descongelar automáticamente)
- Consejos para descongelar
- Sugerencias para descongelar carne
- Programación de Auto Defrost (Descongelar automáticamente)
- Sensor Reheat (Recalentar por sensor)
- Programación de recalentamiento por sensor
- 1. Pulse una vez Sensor Reheat (Recalentamiento por sensor). Titilan †§ -‚ y START (Comenzar) en el display.
- 2. Pulse Sensor Reheat repetidamente hasta que se muestre el número de programa deseado en el display. Verifique la etiqueta del menú en la parte inferior de la cavidad del horno o consulte la tabla de programas que figura a continuación.
- 3. Pulse Start/Enter (Comenzar/Intro) para iniciar el modo de recalentamiento por sensor. Se activa el sensor del aparato, se enciende SENS. en el display. El aparato está funcionando mientras la detección.
- Programación de recalentamiento por sensor
- Sensor Cook (Cocción por sensor)
- Bloqueo de panel
- Valores
- 4. Pulse Clear/Off (Borrar/Apagar) para salir del menú de valores.
- 3. Pulse Start/Enter (Comenzar/Intro).
- Notas
- Cancelación del funcionamiento
- More Modes (Más modos)
- Modos disponibles
- Programación de More modes (Más modos)
- 1. Pulse una vez More Modes (Más modos). Titilan ‚ y START (Comenzar) en el display.
- 2. Pulse More Modes repetidamente hasta que se muestre el número de programa deseado en el display. Verifique la etiqueta del menú en la parte inferior de la cavidad del horno o consulte la tabla de programas que figura arriba.
- 3. Pulse Start/Enter (Comenzar/Intro). Para los modos 1 a 4: titilan ‚ y START en el display. Para el modo 5: titila ‹‹:‹‹ en el display.
- 4. Ingrese la categoría de peso deseada (modos 1 a 4) o ingrese el tiempo de descongelación deseado (modo 5) con las teclas numéricas.
- 5. Pulse Start/Enter para iniciar el funcionamiento.
- Cancelación del funcionamiento
- Cuadros de cocción
- Limpieza y mantenimiento
- 9 ADVERTENCIA
- Limpieza
- Guía de limpieza
- Limpieza de los filtros de ventilación del horno
- 9 ATENCION
- 1. Para retirar los filtros de ventilación, deslice el filtro hacia la parte posterior. Luego, jale el filtro hacia abajo y empuje hacia el otro lado. El filtro se liberará. Repita la operación con el segundo filtro.
- 2. Remoje los filtros de ventilación en agua caliente con un detergente suave. Enjuáguelos bien y sacúdalos para que se sequen. No use amoníaco ni los lave en un lavavajillas. El aluminio del filtro se corroe y oscurece.
- 9 ATENCION
- 3. Para volver a instalar el filtro de ventilación, deslícelo en la ranura lateral, luego, haga presión hacia arriba y en dirección al horno para que quede trabado. Vuelva a instalar el segundo filtro con el mismo procedimiento.
- Mantenimiento
- Reemplazo del filtro de carbón activo
- 1. Desconecte la energía del horno de microondas en el panel de disyuntores o desenchúfelo.
- 3. Saque el grill de ventilación de la unidad.
- 4. Cambie el filtro de carbón activo.
- 5. Con cuidado, vuelva a colocar el grill de ventilación en su lugar haciendo presión y vuelva a colocar los tornillos que se retiraron en el Paso 2.
- Resolución de problemas
- Soporte de Bosch®
- DECLARACIÓN DE GARANTÍA LIMITADA DEL PRODUCTO
- Mantenimiento
22
Cleaning the oven vent filters
The oven ventilation filters should be removed and
cleaned often; generally at least once every month.
9 CAUTION
To avoid risk of personal injury or property damage,
do not operate oven vent without filters properly in
place.
1.
To remove the ventilation filters, slide the filter to the
rear. Then pull filter downward and push to the other
side. The filter will drop out. Repeat for the 2nd filter.
2.
Soak the ventilation filters in hot water using a mild
detergent. Rinse well and shake to dry. Do not use
ammonia or wash in a dishwasher. The aluminum on
the filter will corrode and darken.
3.
To reinstall an oven ventilation filter, slide it into the
side slot, then push up and toward oven to lock.
Reinstall the 2nd filter using the same procedure.
Maintenance
Charcoal filter replacement
The charcoal filter, which was included with your
microwave oven, is used for nonvented, recirculated
installation (Room Venting). The filter should be replaced
every 6 to 12 months depending on use.
1.
Disconnect power to the microwave oven at the circuit
breaker panel or by unplugging.
2.
Remove the vent grill mounting screws.
3.
Pull the vent grill away from the unit.
4.
Change the charcoal filter.
5.
Carefully push the vent grill back into place and
replace the screws removed in Step 2.
Note: If no charcoal filter is installed, it is not possible
to bind the odorous substances in the cooking vapors.
Replacement filters can be purchased from the Bosch
eshop, www.bosch-home.com/us/store.
Part number 00676120
Painted surfaces
Clean with hot soapy water or apply Fantastik
®
or Formula 409
®
to a clean sponge or paper
towel and wipe clean. Avoid using abrasive cleaners, like powder cleaning agents, steel wool
pads and oven cleaners.
Stainless steel sur-
faces
Always wipe or rub in the direction of the grain. Clean with a soapy sponge, then rinse and
dry, or wipe with Fantastik
®
sprayed on a paper towel. Protect and polish with Stainless Steel
Magic
®
and a soft cloth. Remove water spots with a cloth dampened with white vinegar.
Do not use any cleanser that contains chlorine as these may rust the stainless steel
Plastic & Controls When cool, clean with soapy water, rinse and dry.
Printed areas
(words & numbers)
Do not use abrasive cleaners or petroleum based solvents.
Part Recommendations