Manual
Table Of Contents
- Microwave
- Table of ContentsUse and care manual
- Produktinfo
- IMPORTANT SAFETY INSTRUCTIONS
- READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
- 3. Unplug the appliance or shut off at fuse or circuit breaker
- Liquids
- Cooking Items
- Cooking Utensils
- Glass Tray / Turntable Ring
- Exhaust Mode Operation
- Thermometers
- Pacemakers
- State of California Proposition 65 Warnings
- Fan Motor Operation
- Room Venting with Carbon Filter
- SAVE THESE INSTRUCTIONS.
- Causes of damage
- Protecting the environment
- Getting started
- Parts
- Control panel
- Accessories
- How to fit the turntable
- 1. Place the roller rest a in the recess in the oven cavity.
- 2. Let the turntable b slot in place in the drive c in the center of the floor of the oven cavity.
- 2. Place equal amounts of food both above and below rack.
- 1. Heat the empty ovenware at maximum power for ½ to 1 minute.
- Before using the appliance for the first time
- Operation
- Setting the clock
- Setting the Kitchen Timer
- Operating the Ventilation Fan
- Turning the Surface Light on/off
- Turning the turntable on / off
- Operating the microwave
- 1. Enter the desired cooking duration with the number keys. The timer display will fill in from right to left. Example: To set a microwave cooking time of 20 minutes and 30 seconds, enter the numbers 2 0 3 0. START is blinking.
- 3. Enter the desired power level using the number keys. ˜–and the selected power level and START are blinking in the display.
- 4. Touch Start/Enter to start microwave operation.
- Adding cook time (+30 Seconds)
- Auto Defrost
- Setting Auto Defrost
- 1. Touch Auto Defrost once. š“”‚ and START are blinking and the à symbol lights up in the display.
- 2. Touch Auto Defrost repeatedly until the desired program number is shown in the display. Check the menu label at the bottom of the oven cavity or see program table below.
- 3. Touch Start/Enter. ‹.‹ lb is blinking in the display.
- 4. Enter the weight of the food using the number keys.
- 5. Touch Start/Enter to start the program.
- Note:
- Opening appliance door during operation
- Cancel operation
- Auto Defrost programs
- Tips for defrosting
- Defrosting suggestions for meat
- Setting Auto Defrost
- Sensor Reheat
- Sensor Cook
- Panel Lock
- Settings
- 4. Touch Clear/Off to exit the settings menu.
- 3. Touch Start/Enter.
- Notes
- Cancel operation
- More Modes
- Available modes
- Setting More Modes
- 1. Touch More Modes once. ‚ and START are blinking in the display.
- 2. Touch More Modes repeatedly until the desired program number is shown in the display. Check the menu label at the bottom of the oven cavity or see program table above.
- 3. Touch Start/Enter. For modes 1 to 4:‚ and START is blinking on the display. For mode 5: ‹‹:‹‹ is blinking in the display.
- 4. Enter the desired weight category (mode 1 - 4) or enter the desired defrost time (mode 5) with the number keys.
- 5. Touch Start/Enter to start operation.
- Cancel operation
- Cooking Charts
- Cleaning and Maintenance
- 9 WARNING
- Cleaning
- Cleaning Guide
- Cleaning the oven vent filters
- 9 CAUTION
- 1. To remove the ventilation filters, slide the filter to the rear. Then pull filter downward and push to the other side. The filter will drop out. Repeat for the 2nd filter.
- 2. Soak the ventilation filters in hot water using a mild detergent. Rinse well and shake to dry. Do not use ammonia or wash in a dishwasher. The aluminum on the filter will corrode and darken.
- 9 CAUTION
- 3. To reinstall an oven ventilation filter, slide it into the side slot, then push up and toward oven to lock. Reinstall the 2nd filter using the same procedure.
- Maintenance
- Troubleshooting
- Bosch® Support
- STATEMENT OF LIMITED PRODUCT WARRANTY
- ContenidoManual de instrucciones
- Produktinfo
- INSTRUCCIONES DE SEGURIDAD IMPORTANTES
- LEER TODAS LAS INSTRUCCIONES ANTES DE UTILIZAR EL APARATO
- 3. Desenchufe el electrodoméstico o corte la alimentación eléctrica desde el panel de fusibles o el disyuntor.
- Liquidos
- Artículos de cocina
- Utensilios de cocina
- Charola de vidrio/anillo de la bandeja giratoria
- Operación en modo de salida
- Termómetros
- Marcapasos
- Advertencias en virtud de la Proposición 65 del estado de California
- Funcionamiento del motor del ventilador
- Ventilación de ambiente con filtro de carbón
- CONSERVE ESTAS INSTRUCCIONES.
- Causas para los daños
- Protección del medio ambiente
- Cómo comenzar
- Componentes
- Panel de control
- Accesorios
- Para colocar la bandeja giratoria
- 1. Colocar el anillo de la bandeja giratoria a en la hendidura del compartimento de cocción.
- 2. Enclavar la bandeja giratoria b en el accionamiento c del centro de la base del compartimento de cocción.
- 2. Coloque la misma cantidad de alimentos encima y debajo del rack.
- 1. Introducir el recipiente vacío en el aparato durante ½ a 1 minuto a la potencia máxima.
- Antes de usar el horno por primera vez
- Operación
- Programación del reloj
- Programación del temporizador de cocina
- Manejo del ventilador de ventilación
- Encendido/Apagado de la luz de superficie
- Encendido/Apagado del plato giratorio
- Programación del microondas
- 1. Ingrese la duración de cocción deseada con las teclas numéricas. El display del temporizador se llenará de derecha a izquierda. Ejemplo: para programar un tiempo de microondas de 20 minutos y 30 segundos, ingrese los números 2, 0, 3, 0. Titil...
- 3. Ingrese el nivel de potencia deseado utilizando las teclas numéricas. Titilan ˜– y el nivel de potencia seleccionado, y START (Comenzar) en el display.
- 4. Pulse la tecla Start/Enter para iniciar el funcionamiento del microondas.
- Añadido de tiempo de cocción (+30 Seconds [+30 segundos])
- Auto Defrost (Descongelar automáticamente)
- Programación de Auto Defrost (Descongelar automáticamente)
- 1. Presione una vez Auto Defrost (Descongelar automáticamente). Titilan š“”‚ y START (Comenzar) y se enciende el símbolo à en el display.
- 2. Pulse Auto Defrost repetidamente hasta que se muestre el número de programa deseado en el display. Verifique la etiqueta del menú en la parte inferior de la cavidad del horno o consulte la tabla de programas que figura a continuación.
- 3. Pulse Start/Enter (Comenzar/Intro). Titila ‹.‹ lb en el display.
- 4. Ingrese el peso del alimento con las teclas numéricas.
- 5. Pulse Start/Enter para iniciar el programa.
- Nota:
- Abertura de la puerta del aparato durante el funcionamiento
- Cancelación del funcionamiento
- Programas Auto Defrost (Descongelar automáticamente)
- Consejos para descongelar
- Sugerencias para descongelar carne
- Programación de Auto Defrost (Descongelar automáticamente)
- Sensor Reheat (Recalentar por sensor)
- Programación de recalentamiento por sensor
- 1. Pulse una vez Sensor Reheat (Recalentamiento por sensor). Titilan †§ -‚ y START (Comenzar) en el display.
- 2. Pulse Sensor Reheat repetidamente hasta que se muestre el número de programa deseado en el display. Verifique la etiqueta del menú en la parte inferior de la cavidad del horno o consulte la tabla de programas que figura a continuación.
- 3. Pulse Start/Enter (Comenzar/Intro) para iniciar el modo de recalentamiento por sensor. Se activa el sensor del aparato, se enciende SENS. en el display. El aparato está funcionando mientras la detección.
- Programación de recalentamiento por sensor
- Sensor Cook (Cocción por sensor)
- Bloqueo de panel
- Valores
- 4. Pulse Clear/Off (Borrar/Apagar) para salir del menú de valores.
- 3. Pulse Start/Enter (Comenzar/Intro).
- Notas
- Cancelación del funcionamiento
- More Modes (Más modos)
- Modos disponibles
- Programación de More modes (Más modos)
- 1. Pulse una vez More Modes (Más modos). Titilan ‚ y START (Comenzar) en el display.
- 2. Pulse More Modes repetidamente hasta que se muestre el número de programa deseado en el display. Verifique la etiqueta del menú en la parte inferior de la cavidad del horno o consulte la tabla de programas que figura arriba.
- 3. Pulse Start/Enter (Comenzar/Intro). Para los modos 1 a 4: titilan ‚ y START en el display. Para el modo 5: titila ‹‹:‹‹ en el display.
- 4. Ingrese la categoría de peso deseada (modos 1 a 4) o ingrese el tiempo de descongelación deseado (modo 5) con las teclas numéricas.
- 5. Pulse Start/Enter para iniciar el funcionamiento.
- Cancelación del funcionamiento
- Cuadros de cocción
- Limpieza y mantenimiento
- 9 ADVERTENCIA
- Limpieza
- Guía de limpieza
- Limpieza de los filtros de ventilación del horno
- 9 ATENCION
- 1. Para retirar los filtros de ventilación, deslice el filtro hacia la parte posterior. Luego, jale el filtro hacia abajo y empuje hacia el otro lado. El filtro se liberará. Repita la operación con el segundo filtro.
- 2. Remoje los filtros de ventilación en agua caliente con un detergente suave. Enjuáguelos bien y sacúdalos para que se sequen. No use amoníaco ni los lave en un lavavajillas. El aluminio del filtro se corroe y oscurece.
- 9 ATENCION
- 3. Para volver a instalar el filtro de ventilación, deslícelo en la ranura lateral, luego, haga presión hacia arriba y en dirección al horno para que quede trabado. Vuelva a instalar el segundo filtro con el mismo procedimiento.
- Mantenimiento
- Reemplazo del filtro de carbón activo
- 1. Desconecte la energía del horno de microondas en el panel de disyuntores o desenchúfelo.
- 3. Saque el grill de ventilación de la unidad.
- 4. Cambie el filtro de carbón activo.
- 5. Con cuidado, vuelva a colocar el grill de ventilación en su lugar haciendo presión y vuelva a colocar los tornillos que se retiraron en el Paso 2.
- Resolución de problemas
- Soporte de Bosch®
- DECLARACIÓN DE GARANTÍA LIMITADA DEL PRODUCTO
- Mantenimiento
25
purchase, and shall not be stalled, tolled, extended, or
suspended, for any reason whatsoever.
This Product is also warranted to be free from cosmetic
defects in material and workmanship (such as scratches
of stainless steel, paint/porcelain blemishes, chip, dents,
or other damage to the finish of the Product), for a period
of thirty (30) days from the date of purchase or closing
date for new construction. This cosmetic warranty
excludes slight color variations due to inherent
differences in painted and porcelain parts, as well as
differences caused by kitchen lighting, product location,
or other similar factors. This cosmetic warranty
specifically excludes any display, floor, “As Is”, or “B”
stock appliances.
Repair/Replace as Your Exclusive Remedy
During this warranty period, BSH or one of its authorized
service providers will repair your Product without charge
to you (subject to certain limitations stated herein) if your
Product proves to have been manufactured with a defect
in materials or workmanship. If reasonable attempts to
repair the Product have been made without success,
then BSH will replace your Product (upgraded models
may be available to you, in BSH’s sole discretion, for an
additional charge). All removed parts and components
shall become the property of BSH at its sole option. All
replaced and/or repaired parts shall assume the identity
of the original part for purposes of this warranty and this
warranty shall not be extended with respect to such
parts. BSH's sole liability and responsibility hereunder is
to repair manufacturer-defective Product only, using a
BSH-authorized service provider during normal business
hours. For safety and property damage concerns, BSH
highly recommends that you do not attempt to repair the
Product yourself, or use an un-authorized servicer; BSH
will have no responsibility or liability for repairs or work
performed by a non-authorized servicer. If you choose to
have someone other than an authorized service provider
work on your Product, THIS WARRANTY WILL
AUTOMATICALLY BECOME NULL AND VOID. Authorized
service providers are those persons or companies that
have been specially trained on BSH products, and who
possess, in BSH's opinion, a superior reputation for
customer service and technical ability (note that they are
independent entities and are not agents, partners,
affiliates or representatives of BSH). Notwithstanding the
foregoing, BSH will not incur any liability, or have
responsibility, for the Product if it is located in a remote
area (more than 100 miles from an authorized service
provider) or is reasonably inaccessible, hazardous,
threatening, or treacherous locale, surroundings, or
environment; in any such event, if you request, BSH
would still pay for labor and parts and ship the parts to
the nearest authorized service provider, but you would
still be fully liable and responsible for any travel time or
other special charges by the service company, assuming
they agree to make the service call.
Out of Warranty Product
BSH is under no obligation, at law or otherwise, to
provide you with any concessions, including repairs, pro-
rates, or Product replacement, once this warranty has
expired.
Warranty Exclusions
The warranty coverage described herein excludes all
defects or damage that are not the direct fault of BSH,
including without limitation, one or more of the following:
▯ Use of the Product in anything other than its normal,
customary and intended manner (including without
limitation, any form of commercial use, use or storage
of an indoor product outdoors, use of the Product in
conjunction with air or water-going vessels).
▯ Any party's willful misconduct, negligence, misuse,
abuse, accidents, neglect, improper operation, failure
to maintain, improper or negligent installation,
tampering, failure to follow operating instructions,
mishandling, unauthorized service (including self-
performed "fixing" or exploration of the appliance's
internal workings).
▯ Adjustment, alteration or modification of any kind.
▯ A failure to comply with any applicable state, local,
city, or county electrical, plumbing and/or building
codes, regulations, or laws, including failure to install
the product in strict conformity with local fire and
building codes and regulations.
▯ Ordinary wear and tear, spills of food, liquid, grease
accumulations, or other substances that accumulate
on, in, or around the Product.
▯ Any external, elemental and/or environmental forces
and factors, including without limitation, rain, wind,
sand, floods, fires, mud slides, freezing temperatures,
excessive moisture or extended exposure to humidity,
lightning, power surges, structural failures surrounding
the appliance, and acts of God.
In no event shall BSH have any liability or responsibility
whatsoever for damage to surrounding property,
including cabinetry, floors, ceilings, and other structures
or objects around the Product. Also excluded from this
warranty are Products on which the serial numbers have
been altered, defaced, or removed; service visits to teach
you how to use the Product, or visits where there is
nothing wrong with the Product; correction of installation
problems (you are solely responsible for any structure
and setting for the Product, including all electrical,
plumbing or other connecting facilities, for proper
foundation/flooring, and for any alterations including
without limitation cabinetry, walls, floors, shelving, etc.);
and resetting of breakers or fuses.
TO THE EXTENT ALLOWED BY LAW, THIS WARRANTY
SETS OUT YOUR EXCLUSIVE REMEDIES WITH
RESPECT TO PRODUCT, WHETHER THE CLAIM ARISES
IN CONTRACT OR TORT (INCLUDING STRICT LIABILITY,
OR NEGLIGENCE) OR OTHERWISE. THIS WARRANTY
IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER
EXPRESS OR IMPLIED. ANY WARRANTY IMPLIED BY
LAW, WHETHER FOR MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, OR OTHERWISE,
SHALL BE EFFECTIVE ONLY FOR THE PERIOD THAT
THIS EXPRESS LIMITED WARRANTY IS EFFECTIVE. IN
NO EVENT WILL THE MANUFACTURER BE LIABLE FOR
CONSEQUENTIAL, SPECIAL, INCIDENTAL, INDIRECT,
"BUSINESS LOSS", AND/OR PUNITIVE DAMAGES,
LOSSES, OR EXPENSES, INCLUDING WITHOUT
LIMITATION TIME AWAY FROM WORK, HOTELS AND/
OR RESTAURANT MEALS, REMODELLING EXPENSES