Installation Instruction

en Basic settings
28
17 Basic settings
You can configure the appliance to meet your needs.
17.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Basic setting Selection
Language See selection on the appli-
ance.
Clock Clock in 24-hour format.
Water hardness
→"Before using for the
first time", Page15
00 (softened)
01 (soft)
02 (med.)
03 (hard)
04 (very hard)
1
Home Connect HomeConnect Settings
→"HomeConnect ",
Page29
Factory setting Reset
Do not reset
1
Audible signal Short duration (30 seconds)
Medium duration (1 minute)
1
Long duration (5 minutes)
Volume 5 settings
Button tone Switched on
Switched off (tone remains
for ⁠)
1
Display brightness 5 settings
Clock display Off
Digital
1
Analogue
Lighting Off during operation
On during operation
1
Automatic continue
(only applicable for the
Microwave operating
mode)
Do not resume microwave
automatically
1
When closing the door
Childproof lock Button lock only
1
Door lock and button lock
Operation after switch-
on
Main menu
Types of heating
1
Microwave
MicroCombi
Steam
Assist
1
Factory setting (may vary according to model)
Basic setting Selection
Warning: Baking tray in
microwave
Display
1
Do not display
Night-time dimming Switched off
1
Switched on
Brand logo Display
1
Do not display
Dry microwave Switched on
1
Switched off
Fan run-on time Recommended
1
Minimum
Sabbath mode Switched on
Switched off
1
1
Factory setting (may vary according to model)
17.2 Changing the basic settings
Requirement:The appliance is switched on.
1.
Press ⁠.
2.
Press "Basic settings".
3.
Press the required basic setting and use the control
ring to change it.
The red bar next to the text field identifies the basic
setting that is currently selected. Its corresponding
value is shown in the display.
4.
Use"Further settings" to scroll through the basic
settings and, if required, usethe control ring to
change any of these settings.
5.
To save your changes, press and use "Save"
to confirm.
Note:Your changes to the basic settings will be re-
tained even after a power failure.
Discarding changes to the basic settings
▶
Press and use "Do not save" to confirm.
a All changes will be discarded and not saved.
17.3 Setting the time
Requirement:The appliance is switched on.
1.
Press ⁠.
2.
Press "Basic settings".
3.
Press "Time".
4.
Use the control ring to change the time.
5.
To save your changes, press and use "Save"
to confirm.