User Manual

Rails en

pRails

Rails

Removing the hook-in racks

The hook-in racks are each fixed to the side panels of

the cooking compartment at three points.

1. Grip the front of the hook-in rack and pull it to the

middle of the cooking compartment.

The front hook of the hook-in rack will release from

the hole.

2. Fold out the hook-in rack further and pull it from the

rear holes of the side panel.

3. Remove the hook-in rack from the cooking

compartment.

Inserting the hook-in rack

1. Insert the hooks of the hook-in rack into the rear

holes in the side panel.

2. Press the front hook of the hook-in rack into the hole.

qAppliance door

Appliance door

With good care and cleaning, your appliance will retain

its appearance and remain fully functional for a long

time to come. This will tell you how to clean the

appliance door.

Removing and installing the door panels

To facilitate cleaning, you can remove the glass panels

from the oven door.

Removing the door panels

1. Open the oven door fully.

2. Lock both hinges on the left and right using the

locking pin.

Note: The locking pins must be fully inserted into the

holes in the hinges.

3. Lift the bottom of the inner panel slightly until the

fastening pins come out of the holder (1).

4. Carefully lift the top of the inner panel until the

fastening pins come out of the holder (2).

Caution!

When lifting the inner panel, the middle panel may

stick to the inner panel. Make sure that the middle

panel does not fall.

5. Remove the inner panel.



