Installation Instruction

11
Before you begin Before you begin
Tools and parts needed
▯ Measuring tape
▯ Pencil
▯ Phillips screwdriver (Posidrive) #2
▯ Drill with the following bits:
3
/
16
" (5mm)
▯ Spirit level
▯ Aluminum tape (DO NOT use insulating tape)
▯ Exhaust air duct (configuration depends on the
installation situation)
▯ Additional sheet metal screws (if necessary for
installation of the exhaust air duct)
▯ Jigsaw
Parts included
Appliance dimensions
Safety clearances
The clearance between the shelf on the cooktop and the
bottom of the extractor hood may not be less than 24"
(610 mm) in the case of electric cooktops and 29
1
/
2
"
(750 mm) in case of gas or combined ranges.
If the installation instructions for the gas cooking
appliance specify a larger distance, this must be taken
into account.
PP[PP
[
[
PP[PP
[
[ [
èç¼ʀɿ
PP
ë
PP
èç¼ɾʃ
PP
ɻ¼ɾʃ
PP
èç¼ɾʃ
PP

PP
PP
ê
