Specification

ManualsBrandsBosch ManualsOvenWarming Drawer (Stainless Steel) (Common: 27-in; Actual 26.75-in)

Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).

Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and speciﬁcations, at any time, without

notice. Consult the product’s installation instructions for ﬁnal dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty.

For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

General Properties

Power levels High, low, medium

Dough prooﬁng mode Yes

Temperature range 100°-190° F

Timer 5 min.- 5 hours Yes

Automatic shut off after

1 hour

Yes

Door opening Push to Open

Hinges Ball bearing hinges

Wattage heating element 450W

Control type Illuminated

TouchControl

Capacity

Cavity capacity (cu. ft.) 1.9 cu. ft.

Technical Details

Watts (W) 450 W

Circuit breaker (A) 15 A

Volts (V) 120 V

Frequency (Hz) 60 Hz

Power cord length (in) 84"

Plug type 120V-3 prong

Dimensions & Weight

Overall appliance

dimensions (HxWxD)

(in)

9 7/16" x 26 3/4 x

23 1/2"

Required cutout size

(HxWxD) (in)

9 1/4" x 25 1/2" x

23 1/2"

Net weight (lbs) 50 lbs

HWD5751UC

Stainless Steel

The warming drawer keeps

meals hot and is designed

to match the perfectly

ﬂush ﬁt of a Bosch wall,

speed or steam oven.

Features & Beneﬁts

The warming drawer has 3

settings to keep meals hot

and ready to serve.

Installs vertically under

Bosch 120V speed, or wall

oven. (separate cut outs

needed)

Matches Bosch built-in

products. Install either

ﬂush or proud.

27" Warming Drawer

500 Series – Stainless Steel HWD5751UC

Summary of content (3 pages)

PAGE 1
27" Warming Drawer 500 Series – Stainless Steel HWD5751UC General Properties HWD5751UC Stainless Steel The warming drawer keeps meals hot and is designed to match the perfectly flush fit of a Bosch wall, speed or steam oven. Features & Benefits The warming drawer has 3 settings to keep meals hot and ready to serve. Installs vertically under Bosch 120V speed, or wall oven. (separate cut outs needed) Matches Bosch built-in products. Install either flush or proud.
PAGE 2
7" Warming Drawer 500 Series – Stainless Steel HWD5751UC Installation Details Overall Product Dimensions Standard Installation Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST). Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice.
PAGE 3
27" Warming Drawer 500 Series – Stainless Steel HWD5751UC Installation Details Standard Installation 27" Single Oven over Warming Drawer Flush Installation Single Oven over Storage or Warming Drawer Wall oven junction box may be located above or right or left of the unit within reach of the power conduit. Electrical hook up may be located below (depending on space) or next to the drawer within the reach of the power cord. IMPORTANT: base has to be able to support oven weight.