Specifications

wLSN | Reference Guide | 10.0 wLSN Key Fob
40 Bosch Security Systems, Inc. | 3/07 | F01U009440-01
Table 16: wLSN Key Fob Specifications
Power/Voltage Two CR2032 lithium batteries, 3 VDC
Gaskets
Interchangeable; for multiple users, different colors
available
EN50131-1 Security Grade 2, Environmental Class II
10.1 Key Fob Buttons
Refer to your control panel’s documentation to program the
functions of the programmable buttons.
Pressing either the arm or disarm button causes the LED to flash
alternately red and green for about 15 sec. This indicates that
commands were sent to the control panel.
Pressing and holding both the arm and disarm buttons together
for 1 sec transmits a panic signal to the control panel.
10.2 LED
A flashing red LED during key fob inactivity is an indication to
replace the batteries.
For specific information regarding the various LED states, refer to
your control panel’s documentation.