Use and Care Manual
-3-
!).-<A =4-;.7:1/;)?;
74,87?-: <774*A16;=4)<-, /:18816/
;=:.)+-;?0-68-:.7:516/ )6 78-:)<176
?0-:-<0- +=<<16/ )++-;;7:A5)A +76<)+<
01,,-6 ?1:16/ 7: 1<; 7?6 +7:,Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live"
and could give the operator an electric shock.
#;- +4)58; 7: )67<0-:8:)+<1+)4 ?)A<7
;-+=:- )6, ;=887:<<0-?7:381-+- <7)
;<)*4-84)<.7:5Holding the work by hand or
against your body leaves it unstable and may
lead to loss of control.
7 67< ,:144 .);<-6 7: *:-)3 16<7 -@1;<16/
?)44;7:7<0-:*416,):-);?0-:--4-+<:1+)4
?1:16/ 5)A -@1;< If this situation is
unavoidable, disconnect all fuses or circuit
breakers feeding this worksite.
->-: 4-)>- <0- <:1//-: 47+3-,
-.7:-84=//16/<0-<77416+0-+3<0)<<0-
<:1//-:47+31; Accidental start-ups
could cause injury.
- )?):- 7. <0- 47+)<176 )6, ;-<<16/ 7.
<0-;?1<+07+3*=<<76 If the switch
is locked "ON" during the use, be ready for
emergency situations to switch it "OFF", by
first pulling the trigger then immediately
releasing it without pressing the "Lock-ON"
button.
--8 0)6,; )?)A .:75 +=<<16/ ):-) 7
67< :-)+0 =6,-:<0- 5)<-:1)4 *-16/ +=<
The proximity of the blade to your hand is
hidden from your sight.
--8 0)6,; .:75 *-<?--6 <0- /-):
07=;16/ )6, ;)? *4),- 074,-: The
reciprocating blade holder can pinch your
fingers.
767<=;-,=447:,)5)/-,*4),-; Bent
blade can break easily or cause kickback.
-.7:-;<):<16/<7+=<<=:6<774)6,
)447? <0- *4),- <7 +75- <7 .=44 ;8--,
Tool can chatter or vibrate if blade speed is
too slow at beginning of cut and possibly
kickback.
)3-+-:<)16)44),2=;<16/;+:-?;)6,<0-
*4),- 074,-: ):- <1/0< *-.7:- 5)316/ )
+=< Loose adjusting screws and holders
can cause the tool or blade to slip and loss of
control may result.
%0-6 :-57>16/ <0- *4),- .:75 <0-<774
)>71, +76<)+< ?1<0 ;316 )6, =;-8:78-:
8:7<-+<1>- /47>-; ?0-6 /:);816/ <0-
*4),- 7: )++-;;7:A Accessories may be
hot after prolonged use.
. A7=: <7741;-9=188-, ?1<0 ) ,=;< *)/
-58<A1< .:-9=-6<4A)6, ).<-: +7584-<1767.
;)?16/ Spontaneous combustion, may in
time, result from mixture of oil or water with
dust particles. Be ex tremely careful of dust
disposal, materials in fine particle form may be
explosive. Do not throw contents on an open
fire.
1;+766-+<<0-84=/.:75<0-87?-:;7=:+-
)6,7:<0-*)<<-:A8)+3.:75<0-87?-:<774
*-.7:- 5)316/)6A),2=;<5-6<; +0)6/16/
)++-;;7:1-; 7: ;<7:16/87?-:<774; Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
!<7:-1,4-87?-:<774; 7=< 7. <0-:-)+0 7.
+014,:-6)6,,767<)447?8-:;76;=6.)5141):
?1<0<0-87?-:<7747:<0-;-16;<:=+<176;<7
78-:)<-<0- 87?-: <774 Power tools are
dangerous in the hands of untrained users.
)16<)1687?-:<774;0-+3.7:51;)41/65-6<
7:*16,16/7. 57>16/ 8):<; *:-)3)/- 7.
8):<;)6,)6A 7<0-: +76,1<176 <0)< 5)A
)..-+<<0-87?-:<774D;78-:)<176.,)5)/-,
0)>- <0- 87?-:<774:-8)1:-,*-.7:- =;-
Many accidents are caused by poorly
maintained power tools.
--8+=<<16/<774;;0):8)6,+4-)6Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
#;- <0- 87?-: <774 )++-;;7:1-; )6,<774
*1<;-<+16)++7:,)6+-?1<0<0-;-16;<:=+<176;
<)316/16<7)++7=6<<0-?7:316/+76,1<176;
)6, <0- ?7:3 <7 *- 8-:.7:5-,Use of the
power tool for operations different from those
intended could result in a hazardous situation.
!-:>1+-
)>-A7=:87?-:<774;-:>1+-,*A)9=)41.1-,
:-8)1: 8-:;76 =;16/ 764A 1,-6<1+)4
:-84)+-5-6< 8):<; This will ensure that the
safety of the power tool is maintained.
BM 2609932805 12-11:BM 2609932805 12-11.qxp 12/6/11 8:43 AM Page 3