Operating instructions

en
16
Dispensing water
Fig. 6
1. Open the filling device on the water
container.
2. Pour fresh water up to the mark in the
water container (max. 2 litres).
Note
Fill the water container with water only.
3. Press the glass against the dispenser
pad.
Note
The water dispenser can be closed. To
do this, press the lever over the
dispenser pad to the left.
Change the active carbon filter
Fig. 8
There is an activated-carbon filter in the
cover of the water container. This filter
prevents the water from absorbing
odours from the food.
We recommend that the filter is to be
changed every 2 years. Replacement
filters are available from customer
service.
Interior fittings
You can reposition the shelves inside
the appliance and the door shelves as
required:
■ Pull shelf forwards, lower and swing
out to the side.
■ Raise the door shelf and remove. Fig.
4
Special features
(not all models)
Taking out the extendable glass shelf
Fig. 1/15
The glass shelf can be removed for
cleaning. To do this, pull out shelf, lift at
the front and take out.
Bottle shelf
Fig. 1/18
Bottles can be stored securely on
the bottle shelf. The holder can be
adjusted.
Cold storage compartment
Fig. 1/19
The cold storage compartment has lower
temperatures than the refrigerator
compartment. Even temperatures below
0°C may occur.
Ideal for storing fish, meat and sausage.
Not suitable for lettuce and vegetables
and produce sensitive to cold.
Vegetable container with humidity
controller
Fig. 9
To create the optimum storage climate
for vegetables, salad and fruit, the air
humidity in vegetable container can be
regulated according to the quantity
stored.
Smaller quantities of food –
slide the regulator to the left.
Larger quantities of food –
slide the regulator to the right.
Drawer insert
Fig. 1/20
The insert can be taken out.
Bottle holder
Fig. 1/30
The bottle holder prevents bottles from
falling over when the door is opened
and closed.