Operating instructions

en
9
Switching
the appliance on
Switch on the appliance with the On/Off
button 1/11.
A warning signal sounds. “AL” flashes on
the temperature display 2.
Press the alarm button 2/5.
The warning signal switches off. The
warmest temperature is displayed briefly.
The factory has recommended
the following temperatures:
■ Refrigerator compartment: +4 °C
■ Freezer compartment: –18 °C
Operating tips
■ When the appliance has been
switched on, it may take several hours
until the set temperatures have been
reached.
■ The fully automatic No Frost system
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
■ The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
■ If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting
the temperature
Fig. 2
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
1. Press selection button 1 until
refrigerator compartment display 3 is
activated.
2. Keep pressing +/– buttons 8 until
the required temperature is indicated.
Perishable food should not be stored
above +4 °C.
7 Mode button
For selecting the special
functions. See chapter entitled
“Special functions”.
8 Setting buttons
You can use the “+” and “–”
button to set the temperature of
the refrigerator and freezer
compartment. In addition, special
functions can be switched on
and off.
9 “super” button
For switching on the Super
cooling (refrigerator
compartment) function or Super
freezing (freezer compartment)
function.
See chapter entitled “Super
cooling” or “Super freezing”.