Operating/installations instructions

22
Cleaning the water
collection tray
Spilled water collects in the collection
tray.
Remove the sieve to empty and clean
it. Wipe out the water collection tray
with a sponge or absorbent cloth
.
Cleaning the ice cube
container
If no ice cubes have been removed for
an extended period of time, the ice
cubes that have already been made
shrink, taste stale and stick together.
Caution!
Risk of injury.
A full ice cube container is heavy.
Remove the ice cube container very
carefully.
1. Press the release button and
remove the ice cube container.
2. Empty the ice cube container and
clean with lukewarm water.
3. Rub the ice cube container and
feed screw until they are completely
dry, so that the new ice cubes do
not freeze to them.
Inserting the ice cube container
4. Push the ice cube container right
back on the supports until it snaps
into place.
Information!
If you cannot push the container right
the way back, turn the feed screw a
little in the container or remove any
frozen−on ice cubes from the loading
area.
Removing the special
moisture filter
1. Pull the HydroFresh drawers about
10 cm out.
2. Flip up the glass plate above the
HydroFresh drawers and remove it.
3. Reach between the cover
openings, carefully unhook the front
4 catches, and remove the cover.
4. Remove the special moisture filter.
5. Clean the special moisture filter in
lukewarm water and allow to dry.
6. Insert the special moisture filter.
7. Hook in the cover at the rear, fold
down, and snap into place at the
front.
8. Insert the glass plate and close the
HydroFresh drawers.
Lighting (LED)
Your device is equipped with a
maintenance−free LED light.
Caution!
Risk of eye injuries due to Class 1M
laser radiation (IEC 60825)!
Do not look straight at the light using
optical instruments.
Any repair work on the lighting may
only be carried out by customer
services or authorised experts.
deen