Operating instructions

Table Of Contents
en
8
Switching
the appliance on
Fig. 2
Press the On/Off button 1/4. The
temperature warning noise is switched
off by pressing the selection button 3.
The temperature displays 1 flash or
the super display 2 is lit up, until
the appliance has reached the set
temperatures.
When the door is open, the light in the
refrigerator compartment is lit.
Operating tips
When the appliance has been
switched on, it may take several hours
until the set temperatures have been
reached.
The fully automatic No Frost system
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting
the temperature
Fig. 2
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
Keep pressing temperature setting
button 3 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 1.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Perishable food should not be stored
above +4 °C.
Freezer compartment
The temperature in the freezer
compartment depends on
the temperature in the refrigerator
compartment.
Lower temperatures in the refrigerator
compartment also cause lower
temperatures in the freezer
compartment.