Operating instructions

en
33
Bottle shelf
Fig. %
Bottles can be stored securely on the
bottle shelf. The holder can be adjusted.
Vegetable container with humidity
controller
Fig. &
To create the optimum storage climate
for vegetables, salad and fruit, the air
humidity in vegetable container can be
regulated according to the quantity
stored.
The humidity monitor allows fresh food to
be stored up to twice as long as in the
normal cooling zone without loss of
freshness.
Smaller quantities of food –
slide the regulator to the left.
Larger quantities of food –
slide the regulator to the right.
Chiller compartment
Fig. !/17
The chiller compartment has lower
temperatures than the refrigerator
compartment. Even temperatures below
0 °C may occur.
Ideal for storing fish, meat and sausage.
Not suitable for lettuce and vegetables
and produce sensitive to cold.
Ice cube tray
Fig. )
Fill the ice cube tray ¾ full of water and
place in the freezer compartment.
If the ice tray is stuck to the freezer
compartment, loosen with a blunt
implement only (spoon-handle).
To loosen the ice cubes, twist the ice tray
slightly or hold briefly under flowing
water.
Freezer calendar
Fig. !/27
To prevent the quality of the food from
deteriorating, it is important that the
permitted storage period is not
exceeded. The storage period depends
on the type of produce. The figures next
to the symbols indicate the permitted
storage period of the produce in months.
When purchasing frozen produce,
observe the date of manufacture or use-
by date.
Ice block
Fig. (
If a power failure or malfunction occurs,
the ice blocks can be used to slow down
the thawing process. The longest
storage time is obtained by placing the
ice block directly on the food in the top
compartment.
To save space, the ice block can be
stored in the door compartment.
The ice blocks can also be used to cool
food temporarily , e. g. in a cold bag.
Active carbon filters
Fig. !/24
The activated carbon filter ensures that
air is replaced and odours reduced in
the appliance.
Ice maker
Fig. /
1. Remove the ice cube tray, fill ¾ full of
water and re-insert.
2. When the ice cubes are frozen, rotate
the knobs on the ice cube trays
several times to the right and release.
The ice cubes loosen and fall into the
storage container.
3. Remove ice cubes from the storage
container.