User manual

en
8
Controls
Fig. 2
Switching
the appliance on
Switch on the appliance with the main
On/Off switch. Fig. 2/1
The temperature display, Fig. 2/3,
flashes until the appliance has reached
the set temperature.
The appliance starts to cool, the light is
switched on when the door is open.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Do not store perishable food warmer
than +4 °C.
Operating tips
■ After the appliance has been switched
on, it may take several hours until
the set temperature has been
reached.
Do not put any food in the appliance
beforehand.
■ While the refrigeration unit is running,
water droplets or hoarfrost may form
at the rear panel of the refrigerator.
This is due to functional reasons.
It is not necessary to scrape off
the frost or wipe off the water droplets.
The rear panel defrosts automatically.
The condensation collects
in the drainage channel and is carried
to the refrigeration unit where it
evaporates. Fig. 3
■ The front sides of the housing are
partly heated slightly. This prevents
condensation in the area of the door
seal.
Setting
the temperature
Fig. 2
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
Keep pressing temperature setting
button on refrigerator compartment 4,
until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on the
temperature display for the refrigerator
compartment 3.
1 Main On/Off switch
Serves to switch the whole
appliance on and off.
2 “super” button
Switches super freezing on and
off.
Illuminates when super freezing is
on.
3 Temperature display refrigerator
compartment
The numbers correspond
to the set refrigerator
compartment temperatures in °C.
4 Refrigerator compartment
temperature selection button
The button sets the temperature
in the refrigerator compartment.