LTC 0435 & LTC 0455 Installation Manual EN Digital Color Cameras Installatiehandleiding NL Digitale Kleurencamera Manuel d’installation FR Caméra Numérique Couleur Manuale d’installazione IT Installationsanleitung DE Digitale Farbkamera Manual de Instruções PT Câmara Digital Colorida Manual de instalación ES Cámara Digitale de Color Videocamera Digitale a Colori ZH
LTC 0435 & LTC 0455 | Installation Manual EN | 1 SAFETY PRECAUTIONS EN DANGER The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk to persons.
LTC 0435 & LTC 0455 | Installation Manual 7. 8. 9. 10. 11. 12. 13. EN | 2 Do not defeat the purpose of a polarized or grounded mains plug. A polarized plug has dissimilar prongs (one wider than the other) to ensure correct polarity, while a grounded plug has an additional 'ground' prong provided for your safety. If the plug supplied with the apparatus does not fit into your outlet, consult an electrician for advice.
LTC 0435 & LTC 0455 | Installation Manual EN | 3 FCC INFORMATION CAUTION Any changes or modifications to construction of this device that are not expressly approved by the party responsible for compliance could void the userfs authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
LTC 0435 & LTC 0455 | Installation Manual EN | 4 SPECIFICATIONS Standard Active pixels (H x V) LTC 0435/x0 LTC 0455/x1 Standard resolution High resolution PAL NTSC PAL NTSC 512 x 582 512 x 492 752 x 582 768 x 494 Imager Resolution Minimum illumination 1/3" interline CCD 330 TV lines 540 TV lines <0.39 lux <0.65 lux <0.26 lux with Nightsense™ Signal-to-noise ratio > 50 dB Video output Y/C output Synchronization Shutter Nightsense™ Autoblack AGC 1 Vpp, 75Ω Y: 1 Vpp, 75 Ω C: 0.
LTC 0435 & LTC 0455 | Installation Manual EN | 5 Type number overview Low voltage High voltage PAL (Europe) NTSC (USA) PAL (Europe) NTSC (USA) Standard resolution LTC 0435/10 LTC 0435/20 LTC 0435/50 LTC 0435/60 High resolution LTC 0455/11 LTC 0455/21 LTC 0455/51 LTC 0455/61 UNPACKING Unpack carefully and handle the equipment with care.
LTC 0435 & LTC 0455 | Installation Manual EN | 6 To open the quick-connect, push in on the tabs. Connections are not polarity sensitive Use stranded or solid wire AWG16 to AWG22, cut back 10mm (0.4") of insulation.
LTC 0435 & LTC 0455 | Installation Manual Pin Video iris lens DC iris lens 1 Supply (11 V, 50 mA max.) Damp- 2 Not used Damp+ 3 Video signal 1 Vpp, 1 kΩ Drive+ 4 Ground Drive- • • • EN | 7 Video-iris and DC-iris lenses are recommended for the best picture performance. The camera automatically detects the type of lens used, and optimizes performance accordingly. A spare male lens connector is provided if required.
LTC 0435 & LTC 0455 | Installation Manual EN | 8 2. Turn the back focus adjustment as required. (See Note 1). 3. Lock the back focus locking button. Notes: 1. To optimize picture sharpness in both bright and low-level lighting, it is recommended to adjust the back focus when carrying out the set-up procedure. The camera's unique 'Lens Wizard' allows focusing at maximum lens opening to ensure that the object of interest always remains in focus. 2.
LTC 0435 & LTC 0455 | Installation Manual EN | 9 ADVANCED SET-UP The camera will normally give an optimal picture without the need for further adjustments. However for special circumstances advanced set up options are available. Hints for menu navigation How to use the 5 keys Up key Menu/select key Right key Left key Lock Down key • • • • • • Press the menu/select key to access the menus or to move to the next or previous menu. Press the menu/select key for approximately 1.
LTC 0435 & LTC 0455 | Installation Manual EN | 10 Menu Navigation Press the menu button MAIN MENU LEVEL SHUT/AGC BLC COLOR SYNC VPHASE SHUT/AGC MENU 0 OFF ATW LINE LOCK 0¡ SHUTTER AGC AES ON AUTOBLACK NIGHTSENSE ON OFF EXIT EXIT Shutter/AGC Menu Main Menu COLOR MENU WHITE BAL RED-GAIN BLUE-GAIN ATW 0 0 EXIT Color Menu Press the menu button for more than 5sec. LENS WIZARD DETECTED LENS DCIRIS SET BACK FOCUS NOW INSTALLER VERSION 00.0010.
LTC 0435 & LTC 0455 | Installation Manual EN | 11 Main menu Function Selection Description LEVEL -15 - 0 - +15 Adjusts video level. SHUT/AGC Select next menu Shutter / Automatic Gain Control menu. BLC ON OFF COLOR* ATW Select to access the color menu. (See Color ATB HOLD menu for detailed explanation). Select next menu SYNC LINE LOCK INTERNAL Select 'LINE LOCK' to synchronize with the power supply frequency.
LTC 0435 & LTC 0455 | Installation Manual EN | 12 Shutter/AGC menu Function Selection Description SHUTTER AES (AES) Auto-shutter sets the optimum shutter speed FL for manual iris lenses. (FL) Flickerless mode avoids OFF interference from light sources (recommended for use with video-iris or DC-iris lenses only). AGC ON/OFF Automatic gain control AUTOBLACK ON/OFF Autoblack automatically increases the visibility of details.
LTC 0435 & LTC 0455 | Installation Manual EN | 13 Accessing installer menu • To access the installer menu, press and hold the menu/select key for five seconds. Installer menu Function Selection Description VERSION Read-only firmware release number (for service purposes). LENS AUTO Automatically detect lens type. A different lens type can be selected. SPEED FAST Selects the response time of DC-iris lenses. Some lenses require slow lens control to avoid overshoots.
LTC 0435 & LTC 0455 | Installation Manual EN | 14 Adjustment procedure DC-iris Lens: 1. Unlock the back focus locking button. 2. Access the "Lens Wizard" menu. 3. The "SET BACK FOCUS NOW" option is highlighted in the menu. 4. Turn the back focus adjustment as required. 5. Lock the back focus locking button. 6. Exit the menu. Adjustment procedure Manual-iris Lens: 1. 2. 3. 4. Unlock the back focus locking button. Adjust the lens to the maximum lens opening. Turn the back focus adjustment as required.
Bosch Sicherheitssysteme GmbH Bosch Security Systems B.V. Ludwig-Bölkow-Allee P.O. Box 80002 85521 Ottobrunn 5600 JB Eindhoven Germany The Netherlands www.bosch-sicherheitssysteme.de www.boschsecuritysystems.com 3122 165 23071 04-05 © 2003 Bosch Security Systems B.V.